Since ancient times, fishermen have used baits for fishing that imitate various insects or bugs that inhabit rivers, lakes, ponds and other bodies of water. As a rule, such insects are the main food of many fish, and they excellently caught on imitation baits. Such baits are called flies, and they are quite catchy. The presence of flies will give the fisherman the opportunity not to think about where and how to purchase bait every time he goes fishing. Moreover, with a little practice, you can constantly tie your own flies, thereby providing yourself with catchy baits.

Using this fishing method, you can catch any fish, such as ide, etc. In the summer, fish feed on insects that fall into the water, as well as various types mayfly butterflies and worms that are found in the silt of reservoirs. You can use flies all season, from spring to late autumn.

Artificial baits in the form of flies have the versatility of their use. In addition, they are convenient to work with, and you can catch both predatory and peaceful fish. You can find several main types of artificial baits of this type.

They imitate drowned insects. They are distinguished by a thinner body, as well as the presence of legs and a tail. As a rule, such flies are used to catch fish such as grayling or salmon.

These baits imitate adult flies, gadflies, dragonflies, etc., which somehow ended up in the water. Non-sinking materials are used for their manufacture, so such flies are always on the surface of the water. They are made on the basis of thin hooks so that the bait has minimal weight. Roach, rudd, chub, etc. react to such baits.

They look like underwater insects in development. They are good for catching grayling and salmon. The more believably the fly imitates an insect, the more effective the fishing will be.

A special type of bait that imitates insects that are at the stage of turning a pupa into a full-fledged individual.

This bait differs in that it resembles a fish fry, which is used to catch predatory fish, such as grayling. Such flies are very difficult to make, as they require special skill. As a rule, such a fly is used for catching predatory fish.

Necessary materials and tools for making flies

To learn how to make flies with your own hands, you should stock up on certain materials and tools. Tying flies is not very difficult and can be done by any amateur fisherman. As a rule, the fisherman already has most of the necessary tools, because it is impossible without them.

To tie flies you will need the following tools:

  • vice;
  • needles;
  • knotweed;
  • overexposure;
  • scissors;
  • threader;
  • bobbin thread holder;
  • tweezers;
  • magnifying glass;
  • mirror;
  • lamp;
  • mortar;
  • brush.

To do this you will need the following materials:

  • Hooks. For tying flies, you should purchase special hooks, but you can also use regular ones: for dry flies, use hooks made of thin wire, and for other types of flies, thicker ones.
  • Bird feathers. As a rule, rooster feathers are used.
  • Dabbing.
  • Wool.
  • Lurex.

DIY dry fly


To make a simple fly you will need several strands of hair. bright color, about 5 cm long. It is preferable to use a bright black or bright orange shade. The hook is removed from the spoon and the hairs are threaded through the ring, which are fixed on the hook using a cambric. After fixing the hairs, they can be fluffed using a needle or other sharp object.

This is the simplest fly that requires minimum quantity time and minimum materials used. It can be made directly while fishing or before going fishing. The use of bright colors allows you to increase the catchability of the bait. This fly can be used for catching perch, as well as pike at shallow depths.

DIY pike streamer

In the summer, aquatic vegetation grows rapidly, so many reservoirs become overgrown, making it impossible to use conventional baits. In this case, non-hooking baits are better suited, which increase the chances of catching fish, since most fish species prefer to be in thickets of aquatic plants. Some hide in the thickets from predators, while others ambush representatives of peaceful fish. Many anglers use a pike streamer, both with a regular hook and with a non-snag hook. Such baits can be used in tackle with a Sbirullino float or in regular tackle. To facilitate the casting process, it is worth securing the appropriate weight on a separate leash.

The basis of any fly is a hook, somewhere around size 9 or 10. It is possible to use a special hook with . In addition to the hook, you will need wool and a piece of lurex.

First, a piece of lurex, about 5 cm long, is wound to the shank of the hook. After this, the lurex must be fluffed using a needle or other sharp but thin object. Using the same thread, a rooster feather is attached on top of the lurex. You can use hairs various colors, but no more than five, since the presence of a large number of shades on the bait can scare away the fish. After this, the thread should be secured with nail polish. After fixing the product, the hairs are fluffed out using an awl or needle. The bait is ready for use.

This streamer catches perch perfectly if you additionally attach a certain weight to it. This bait will please the amateur fisherman with its effectiveness when catching pike or perch in the middle of autumn.

Video - instructions for making a front sight

On the Internet you can see many videos that tell and show how certain flies are tied. Among this variety you can find a video about tying a Mayfly fly. Its production is quite simple and does not require the use of expensive materials and unique tools. The mayfly fly is tied on hooks of various sizes, which allows it to be used for catching most types of fish.

Disadvantages and advantages of artificial flies

Artificial flies have a number of advantages, compared to other types of bait. They are simple, reliable and, at the same time, versatile, which allows them to be used for catching almost all types of fish. Moreover, the flies are durable, so you can provide yourself with such baits for for a long time, if you make them yourself.

Another factor that is decisive when making them yourself is the low quality of flies purchased in trading network. Of course, you can find branded copies of well-known companies, but they are quite expensive, although they are catchy. Many fishermen buy store-bought products, but most try to make them themselves, especially since, apart from a hook, nothing in short supply is required. All that is required is desire and perseverance, since making some flies takes quite a lot of time. In addition, you will need a creative approach, otherwise you will not be able to tie a good, high-quality fly.

Artificial flies have one drawback, which boils down to the fact that you need to spend a lot of time learning how to tie really catchy lures. Despite the apparent simplicity, one initially gets the impression that everything is really very simple. Unfortunately, it’s just everything for those who do nothing. As for fly tying, it is responsible, meticulous and hard work. In addition, this process is quite interesting, just like the fishing process itself. Real enthusiastic fishermen prefer baits made with their own hands in a home workshop. Oddly enough, such baits are more catchy than some specimens, especially cheap copies that are sold in fishing stores. This speaks of a creative approach and high craftsmanship, especially since every fisherman is very interested in seeing how his work of art works.

Making bait at home is not very expensive in a financial sense, so it is accessible to almost every fisherman who wants it. The main thing is to be patient and allocate some of your personal time.

Since ancient times, fishermen have used baits for fishing that imitate various insects or bugs that inhabit rivers, lakes, ponds and other bodies of water. As a rule, such insects are the main food of many fish, and they excellently caught on imitation baits. Such baits are called flies, and they are quite catchy. The presence of flies will give the fisherman the opportunity not to think about where and how to purchase bait every time he goes fishing. Moreover, with a little practice, you can constantly tie your own flies, thereby providing yourself with catchy baits.

Using this fishing method, you can catch any fish, such as perch, roach, ide, grayling, pike, etc. In the summer, the fish feed on insects that fall into the water, as well as various types of mayflies and worms that are found in the silt of reservoirs. You can use flies all season, from spring to late autumn.

Types of artificial flies

Artificial baits in the form of flies have the versatility of their use. In addition, they are convenient to work with, and you can catch both predatory and peaceful fish. You can find several main types of artificial baits of this type.

They imitate drowned insects. They are distinguished by a thinner body, as well as the presence of legs and a tail. Typically, fly fishermen use such flies to catch fish such as grayling or salmon.

These baits imitate adult flies, gadflies, dragonflies, etc., which somehow ended up in the water. Non-sinking materials are used for their manufacture, so such flies are always on the surface of the water. They are made on the basis of thin hooks so that the bait has minimal weight. Roach, rudd, chub, etc. react to such baits.

They look like underwater insects in development. They are good for catching grayling and salmon. The more believably the fly imitates an insect, the more effective the fishing will be.

A special type of bait that imitates insects that are at the stage of turning a pupa into a full-fledged individual.

This bait differs in that it resembles a fish fry, which is used to catch predatory fish, such as grayling. Such flies are very difficult to make, as they require special skill. As a rule, such a fly is used for catching predatory fish.

Necessary materials and tools for making flies

To learn how to make flies with your own hands, you should stock up on certain materials and tools. Tying flies is not very difficult and can be done by any amateur fisherman. As a rule, the fisherman already has most of the necessary tools, because it is impossible without them.

To tie flies you will need the following tools:

  • vice;
  • needles;
  • knotweed;
  • overexposure;
  • scissors;
  • threader;
  • bobbin thread holder;
  • tweezers;
  • magnifying glass;
  • mirror;
  • lamp;
  • mortar;
  • brush.

To do this you will need the following materials:

  • Hooks. For tying flies, you should purchase special hooks, but you can also use regular ones: for dry flies, use hooks made of thin wire, and for other types of flies, thicker ones.
  • Bird feathers. As a rule, rooster feathers are used.
  • Dabbing.
  • Wool.
  • Lurex.

DIY dry fly


To make a simple fly, you will need several brightly colored hairs, about 5 cm long. It is preferable to use a bright black or bright orange tint. The hook is removed from the spinner and the hairs are threaded through the ring, which are fixed on the hook using a cambric. After fixing the hairs, they can be fluffed using a needle or other sharp object.

This is the simplest fly that requires a minimum amount of time and a minimum of materials used. It can be made directly while fishing or before going fishing. The use of bright colors allows you to increase the catchability of the bait. This fly can be used for catching perch, as well as pike at shallow depths.

DIY pike streamer


In the summer, aquatic vegetation grows rapidly, so many reservoirs become overgrown, making it impossible to use conventional baits. In this case, non-hooking baits are better suited, which increase the chances of catching fish, since most species of fish prefer to be in thickets of aquatic plants. Some hide in the thickets from predators, while others ambush representatives of peaceful fish. Many anglers use a pike streamer, both with a regular hook and with a non-snag hook. Such baits can be used in tackle with a Sbirullino float or in regular tackle. To facilitate the casting process, it is worth securing the appropriate weight on a separate leash.

The basis of any fly is a hook, somewhere around size 9 or 10. It is possible to use a special hook with . In addition to the hook, you will need wool and a piece of lurex.

First, a piece of lurex, about 5 cm long, is wound to the shank of the hook. After this, the lurex must be fluffed using a needle or other sharp but thin object. Using the same thread, a rooster feather is attached on top of the lurex. You can use wool of different colors, but no more than five, since the presence of a large number of shades on the bait can scare away the fish. After this, the thread should be secured with nail polish. After fixing the product, the hairs are fluffed out using an awl or needle. The bait is ready for use.

This streamer catches perch perfectly if you additionally attach a certain weight to it. This bait will please the amateur fisherman with its effectiveness when catching pike or perch in the middle of autumn.

Video - instructions for making a front sight

On the Internet you can see many videos that tell and show how certain flies are tied. Among this variety you can find a video about tying a Mayfly fly. Its production is quite simple and does not require the use of expensive materials and unique tools. The mayfly fly is tied on hooks of various sizes, which allows it to be used for catching most types of fish.

Disadvantages and advantages of artificial flies

Artificial flies have a number of advantages, compared to other types of bait. They are simple, reliable and, at the same time, versatile, which allows them to be used for catching almost all types of fish. Moreover, flies are durable, so you can provide yourself with such baits for a long time if you make them yourself.

Another factor that is decisive when making them yourself is the low quality of flies purchased in the retail chain. Of course, you can find branded copies of well-known companies, but they are quite expensive, although they are catchy. Many fishermen buy store-bought products, but most try to make them themselves, especially since, apart from a hook, nothing in short supply is required. All that is required is desire and perseverance, since making some flies takes quite a lot of time. In addition, you will need a creative approach, otherwise you will not be able to tie a good, high-quality fly.

Artificial flies have one drawback, which boils down to the fact that you need to spend a lot of time learning how to tie really catchy lures. Despite the apparent simplicity, one initially gets the impression that everything is really very simple. Unfortunately, it’s just everything for those who do nothing. As for fly tying, it is responsible, meticulous and hard work. In addition, this process is quite interesting, just like the fishing process itself. Real enthusiastic fishermen prefer baits made with their own hands in a home workshop. Oddly enough, such baits are more catchy than some specimens, especially cheap copies that are sold in fishing stores. This speaks of a creative approach and high craftsmanship, especially since every fisherman is very interested in seeing how his work of art works.

Making bait at home is not very expensive in a financial sense, so it is accessible to almost every fisherman who wants it. The main thing is to be patient and allocate some of your personal time.

Many fishermen attract the attention of fish using artificial baits that imitate the natural prey of deep-dwelling creatures, such as bugs or insects. Tying flies allows you to do without purchased products. If you have the desire and a small amount of free time, you can make such an element with your own hands at home. Homemade flies are considered one of the most catchy baits; you can use them to catch virtually any fish, including predators and peaceful inhabitants of the depths. In spring, as well as summer time and pick up grasshoppers and insects from the surface. Fish can be deceived by using artificial flies.

As we have already said, flies are used to hunt predatory and peaceful fish. These fishing lures can be:

  • wet;
  • dry.

Wet flies imitate drowning insects. Such products are distinguished by a thin body. To make them more similar to the original, they should have a tail, wings and legs. The equipment elements in question are used for fly fishing; they are suitable for catching.

Dry flies in appearance they are similar to dragonflies, houseflies and gadflies. For the manufacture of the described parts, non-sinking materials should be used, since the bait must float. The product includes thin hooks with minimal weight and threads for weaving. This bait is ideal for novice fishermen; roaches also use it.

Artificial flies can be divided into the following types:

  1. « Nymphs"or insect embryos. This kind of bait has been used for a long time and very successfully to catch salmon fish and grayling. According to experts, the fishing result will depend on how similar the artificial fly is to the original.
  2. The next subspecies " emergers" imitates insects emerging from the pupal stage, when the embryo turns into an adult.
  3. And the last variety " streamers" indicates a product that resembles a fish fry. The fly is used to catch grayling and other predators. Not everyone can make this type of fly; only a professional can handle such work.

What materials will be needed for work?

Only a few know how to make fishing flies with their own hands, but everyone can do such work. To tie a high-quality fly at home, you need a set of the following tools:

  • bench vice;
  • needles;
  • scissors;
  • device for tying knots;
  • tweezers;
  • mirror;
  • magnifying glass;
  • paint brush;
  • pet hair;
  • beautiful bird feathers, usually taken from a rooster;
  • hooks: thin ones for tying dry flies, thick ones for wet ones.

The most expensive tool is a vice. They are installed on a reliable base and secured with a clamp. The vice should have a hard working part with a black coating, which will prevent eye fatigue while working. The jaws of this tool should fit snugly against each other and hold the hooks well in any position.

Photo1. Vise for tying flies.

The feather clip holds the wings or legs of the fly near the hook. This element is made of durable wire made of elastic steel. Such a product must provide significant force when fixing the feather or other parts to the hook. To work effectively, the master must have clamps of several sizes.

Scissors are considered one of the most important devices. They must be sharp, because when making a fly with your own hands, you have to cut off pieces of wool or feathers every now and then.

Pay attention! Scissors should not be used to cut wire or other hard parts. For this purpose you will need special nippers.

Tying fishing flies is impossible without using a reel seat. This device allows you to hold the mounting thread while knitting. The hole in the part must be carefully sanded so as not to tear consumables. Additional tools include tweezers (used for plucking wool and working with hooks), as well as needles. With their help, they adjust the brush or apply varnish to the finished fly.

Photo 2, Reel seats.

Fly Tying Basics

Work on tying flies begins with fixing the main material near the bending point of the hook, and fixing the tip of the moistened cotton thread in the same area. It is advisable to secure the hook in a vice, after which winding is carried out. The body of the bait is made from threads of several colors, the loop is cut off near the eye. The head of the fly is made with several turns of the thread. Next, horsehair is inserted into the product using a needle and the wings and legs of the insect are formed, while each part of the body should have its own direction.

Important! Maintain strict symmetry when making the antennae, wings and legs of the artificial bait, this will make the artificial bait more believable.

Do-it-yourself fishing flies must be careful. The finished product should not have loops near the body. Long sections of threads or horsehair are shortened using a soldering iron or a cigarette until the limbs are given the required size. After such operations, lighter areas remain at the ends of the hairs. At the final stage of work, the finished flies are washed in the mixture warm water and washing powder and then dried.

When making flies with your own hands at home, you should take into account the following behavioral features of fish:

  • The inhabitants of the depths can see even at dusk.
  • Pisces are excellent at distinguishing colors, especially warm shades.
  • In dry artificial baits, as a result of refraction, the inhabitants of reservoirs first pay attention to the wings, and only after that to other details of the product and shape.
  • Individual parts of the product must accurately imitate natural insects, this applies not only to shape, but also to color.
  • A bait with air bubbles on the body allows you to attract additional attention from the fish. Such details are more perceived by fish, because bubbles increase the effect of refraction sun rays on the surface of the water.
  • The transparency of the bait is also of particular importance. This can be achieved by making a fly from transparent films with the addition of natural wool, which will retain air bubbles on the water.
  • When fishing in the current, the silhouette of the bait is important for fish; the last importance is given to the color.

Examples of making flies

First, let's describe one simple fishing method for making a dry fly. We need to take long shiny wool of orange or black color, the length of the fibers is 5 centimeters. Now we take a small hook and pull the lint through its eye. The position of the wool is fixed using a cambric, which is put on the ear. The fisherman just has to fluff up his fly and make it look like the prey of predators. A similar bait is used because this bait should sink and imitate the natural prey of these fish. One option is to use an ant fly. To do this, take a small hook, for example No. 5, and wind the thread to make the areas look like the head and chest of an insect. Next, a small feather is attached to the product, which will imitate the legs, and the forend is once again wrapped with thread. At the final stage, the ant is painted black or red and the legs are trimmed. That's it, the wet fly is ready.

Flies are artificial baits that imitate insects in various stages of their development and serve as food objects for fish. People have long learned to make and catch both dry and wet varieties. At first, primitive, simple gear was used for such fishing; today, fly fishing is, of course, the first choice.

Today's subject of our conversation is flies for grayling. This Siberian, which belongs to the salmon family, loves to feed on live insects and their larvae, so it is very often caught using artificial imitations of them.

Advantages and types of flies

Such an artificial bait as a fly undoubtedly has many advantages that determine the advisability of their use:
1.Versatility for fish. The same fly can tempt both small chub and grayling, and large lenok and taimen.

2. Possibility of use with different gear such as boat, drag, fly fishing, bombard, spinning.

3.The compactness of the bait allows you to use small pencil cases and boxes that do not take up much space during storage and transportation.

Fits in a small box large number flies.

4. Low cost of ready-made baits.

5. Possibility of self-production and tying of flies, due to the variety of materials used and their low price.

6.Easy installation of the bait, tying the fly is as easy as a regular hook.

7. If a fly is made with high quality, it can serve the angler for many years. There are no special storage requirements; the main thing is to thoroughly dry the bait to prevent corrosion of the hook.

Flies are divided into two large groups according to their application:

  • dry;
  • wet.

Dry baits are those used for fishing from the surface of the water; they are also called riding baits. They imitate insects that have fallen into the water: flies, butterflies, bugs, dragonflies and others.

Wet, or bottom, baits are heavier than water and are carried in the lower horizons of the water flow. Beetles, caddis flies, larvae and pupae of insects are the objects of imitation of this type of deception.

Our help! Some insect larvae are called nymphs, so this has become a common name for wet flies.

Types of tackle for fly fishing

Flies for catching grayling can be used when fishing with several types of gear:
1. Retightening. An ancient tackle in which fishing is carried out from both sides of the river using the equipment of two fishing rods fastened together. In this case, leashes with flies are attached to the working line, and fishermen lower them to the surface of the water, enticing the fish to bite.


The harness for one angler is equipped with a rubber shock absorber.

2.Ship. This is the name of a design that operates on the principle of a kite, controlled by a fisherman from the shore, and delivering the fly a considerable distance from the shore.


Fishing with flies on a boat tackle.

3.Fly fishing. Modern sports tackle, in which a light fly is cast due to the weight of a fly line, which has a special profile and sufficient weight.

4. Sbirulino. The Italian fishing rod with a float, also called a bombarda, delivers a dry or wet fly over a long distance due to its own mass, which provides good flight qualities when casting with a spinning, feeder or match rod.


Installation diagram of float tackle for fly fishing.

5.Ultralight spinning rod also used when casting both wet and dry flies. In this case, the main fishing technique is to float the bait downstream.

Attention! Type and appearance The fly used does not depend on the choice of gear, but must correspond to the food preferences of the grayling itself.

Seasonality of baits used

The main point in catching grayling with a fly is selecting the most suitable bait depending on the specific river and time of year. Naturally, in May or June, imitations of insects that appear in August or September will not work. It is also necessary to take into account the regional distribution of insects by species.

You can start catching grayling with a fly immediately after the water bodies are cleared of ice. Since in the spring the appearance of the first insects does not occur immediately after ice drift, anglers are the first to begin tying wet flies that imitate bottom microorganisms.


A fly that imitates a caddis fly larva.

One of the first insects to emerge in late spring are mayflies. At this time, almost all fish feed exclusively on them. Therefore, for this fishing season, fly fishers should stock up on a sufficient number of appropriate decoys.

In summer, the number of insects is incalculable. At this time of year, anglers have the greatest choice in the use of artificial baits. Which of the decoys will shoot on a specific day on a specific body of water, only practice will show. In any case, it’s worth stocking up on the following fly options:

  • ants;
  • amphipods;
  • dragonflies;
  • wasps, bumblebees, bees;
  • actually, flies;
  • butterflies;
  • various beetles;
  • dragonflies.

The end of summer brings its insects into the fish diet. Grayling fishing in the fall is carried out using other types of bait. The most catchy flies at this time are imitation caddis flies and their larvae.

Also good autumn baits are imitation insects in the pupal stage. Many insects in this phase go to winter, so the fish are accustomed to eating them at the end of the open water season.

Attention! In different areas, insects may differ in color tone. This must be taken into account when choosing a specific fly.

Materials and tools for making flies

Homemade craftsmen use an incredible variety of materials, both natural and artificial, to knit trompe l’oeil:

  • bird feathers;
  • animal fur;
  • various types of threads;
  • Lurex;
  • chenille;
  • foam;
  • dabbing;
  • beads;
  • biota.

To ensure that the process of fly tying is not inconvenient, auxiliary tools and devices are used:

  • vice;
  • scissors;
  • tweezers;
  • knotweed;
  • overexposure;
  • spool holders;
  • auxiliary reels.


Materials and equipment for tying flies.

To make light dry flies, hooks made of thin wire are used, and to make bait, the fluffiest materials are used, from which it is easy to construct both the body of an artificial insect and wings, legs or antennae.

When tying a wet nymph for catching grayling, you need to use hooks made of thick wire in combination with the most dense materials. Often, to make the bait heavier, wire winding is used on the fore-end.

Making bait

Making a fly for grayling with your own hands is not as difficult as it seems to novice fishermen. This handicraft is so exciting that for some it becomes the same hobby as fishing itself.

We present to your attention step by step instructions making a typical fly for grayling fishing. In order to knit it you will need a small set of materials and tools:

  • vice;
  • scissors;
  • tweezers;
  • feathers;
  • thin threads;
  • dubbing or natural wool;
  • beads;
  • sharp hook;
  • waterproof glue.

The manufacturing process must be carried out in the following sequence:

  1. A hook with a bead pre-attached to it is clamped in a vice.
  2. From the bead to the bend, a backing is formed from a dark, preferably black, thread.
  3. A tail is formed from a rooster feather and secured with a thread along the entire length of the forearm, the excess is cut off.
  4. The body is formed from dubbing or natural wool. In this case, the fluffy material is laid together with the thread.
  5. A train of rooster feathers is formed around the head and secured with thread.
  6. The excess is cut off, then the fly is glued with waterproof glue.

How to tie a fly

Before you catch fish with a fly, you should tie it correctly to the leash of the tackle. To do this, you can use various nodes:

  • Palomar;
  • bloody;
  • Rapala;
  • clinch.
  1. We pass the end of the fishing line 10-15 centimeters long into a ring.
  2. We form a loop in which we make at least five turns with the free end.
  3. Tighten the end of the fishing line and the hook.
  4. Gradually tighten the loop to the hook ring.


Step-by-step photo of making a Uni-knot.

Conclusion

Grayling flies are easy-to-use and easy-to-make baits that do not require much physical effort or material costs. At the same time, they are one of the most catchy baits for this beautiful and strong fish.

Greetings, fishermen of our richest region! My name is Pavel Gorokhov. In our native Kuzbass, fishing for predatory fish is widespread, including my favorite grayling. In this article I want to tell you about how to tie a riding fly, which showed excellent results when catching grayling on the so-called “Balda” or “Boat”. The fly is universal, works both in summer and autumn, as long as the water is light!

I’ll say right away that the fly is simple, but this is its trump card, and it’s very difficult to show how to tie a complex fly without using a video. A given fly can have a great variety of colors, but in this case I chose one of my trump colors, the most catchy ones.

If you decide to tie a fly tying yourself, then I think everyone has a minimum set for tying flies, so I won’t describe the devices. From the materials we will need: A brown rooster feather (any other feather of your choice), a peacock feather, lurex thread, mounting threads of brown and “dirty gold” colors and preferably the skin of a fur-bearing animal, in this case it is the skin of a scribe.


Are you ready? Great! Let's start tying the fly. We fasten the hook and fix the lurex with a mounting thread of the main color. Pay attention to where the body of your fly ends, it should not go into the bend, but end approximately where the bend begins, otherwise the fly will not turn out so beautiful and neat. After we have secured the thread, we pull it back until we no longer need it.


Now we will need fur. We need to pluck out a small bunch from it and secure it as shown in the figure, cutting off the excess that is not useful to us. Pay attention to the length of the bristles, it should not be too long, correlate it with the hook number. In this case, I use a straight Scorpio hook, number 14, quite small. Why don't we say the vaunted "Kamasan"? Yes, because for 10 years now we have been tying flies and fishing with the inexpensive Scorpio and these hooks have never shown themselves to be bad! Durable and sharp! I don't see any point in overpaying!



Next we mount the body. Nothing complicated, just give your fly its future appearance! The main thing here is not to overdo it. Skinny is bad, fat is also bad! We try to find a middle ground and then move on to the next stage.


It's time to use Lurex. Carefully, with tension and a uniform increase in pitch, we wind the lurex, and then secure it with the thread that was used to mount the body. Important point, if you don’t tighten the lurex enough, then when you bite it will quickly slide off and the fly will be ruined.


Take a peacock feather. We fasten it with a mounting thread from the side of the eye of the hook and wind it, creating a velvet skirt, after which we also fasten and cut it. We take the knotter in our hands and fasten the mounting thread with which we mounted the body - we will no longer need it.


We take a brown thread and fasten it from the end of the fly, after which we take the fur again. Now you need to take less fur than the first time and secure it after the peacock feather, so that the fur is evenly distributed around the entire circumference of our hook. To do this, you must first loosely fix the fur and straighten it the way you need. After the fur lies evenly, we secure it.


Now we select a rooster feather with a suitable beard size. We secure the feather and make a brush, fixing it and cutting off the excess. Please note that the feather must be pulled in the same way, otherwise everything will fall apart at the first bite.


All that remains is to mount the head, secure the thread and coat the finished head with varnish so that it does not unravel. All! The fly is ready. Equip your gear and enjoy fishing!



See you again! No tail, no scales!