In Russia there have always been craftsmen who surprised the world with their skills and inventions. We are especially good at making weapons. So Izhevsk master Mikhail Kalashnikov created the legendary AK-47 assault rifle, which inspired another master to build a copy of it from a simple garden shovel and iron pipes.

And by the way, this is not a Russian craftsman at all.

On the left in the photo, by the way, is the same machine gun made from a shovel, and on the right sniper rifle Dragunov (SVD).
But we are getting ahead of ourselves.

The master who made this is from the USA. Once he was driving past a store with gardening tools, saw a shovel there and decided to buy one. This was the best deal he could get for $2, he thought.

The handle of the shovel, by the way, later turned into a butt and is surprisingly quite comfortable.

I decided to try the stock on an old Kalash. The cat looks in bewilderment, is the owner drunk again?

I cut off a tray from a shovel; the machine body will be made from it.

I roasted it well on the fire.

Now you need to level this sheet of iron.

We bend the sheet and drill holes.

On the left is a detail from a real Kalash, on the right is from a future one.

Specialists, of whom there are always many, will tell you in the comments what kind of detail it is.

More details.

We weld

It was the turn of the barrel, you could buy the original for 200 bucks, but they preferred the economy option for 30 bucks.

Below in the photo is the upper barrel from a real Kalash, in the middle is a ready-made factory version of the barrel and a third, collective farm version - our choice.

We process the trunk.

Let's try it on.

Let's finish the details.

We weld parts from a real machine gun.

There is very little left.

We drill a hole to remove gases.

We try on the magazine and the butt of the shovel, everything seems to fit!

What's most surprising is that he shoots, and the bullets fall quite close together.

After 60 rounds the barrel got a little hot, but my homemade AK-47 performed quite well.

In total, at minimal cost we get a pretty good, combat-ready weapon. Thanks to Mikhail Kalashnikov for his great invention!

If you have anything to add, dear weapons experts, please comment.

Those who provoke srach about Russia, Ukraine and Putin are banned without warning.

Click the button to subscribe to "How it's Made"!

If you have a production or service that you want to tell our readers about, write to Aslan ( [email protected] ) and we will make the best report that will be seen not only by readers of the community, but also of the site How it's done

Also subscribe to our groups in Facebook, VKontakte,classmates and in Google+plus, where the most interesting things from the community will be posted, plus materials that are not here and videos about how things work in our world.

Our channels on YouTube
How it's done - https://goo.gl/fy5MFe
How it was done - https://goo.gl/8YGIvl
Jean Peugeot - https://goo.gl/L88mip

Subscribe to our community on LiveJournal -

IN modern world many children are practically indifferent to toys. Electronic gadgets are of much greater interest now. Of course, every parent is concerned about this and tries to introduce their child to games with real objects.

One of the most the best ways One way to wean your child off from virtual worlds is to make a toy with him. A do-it-yourself machine will be an excellent toy with which you can have a lot of fun. And if you manage to save it, it will be an excellent souvenir “from childhood”, bringing with it a lot of pleasant memories.

There are several ways in which you can create an automaton. It all depends on how much time and effort you are willing to put into the craft. Another important factor is the availability of all the necessary tools. After all, not everyone has a whole carpentry kit in stock.

If the child for whom the product is intended is old enough, then you can further diversify the toy. Namely, add a shooting function.

The main thing to remember is that in order not to overshadow the process of creating a wooden machine, you should also not forget about basic safety rules. Protect your hands when working with cutting tools. Purchase in advance protective mask and a respirator for working on a grinding machine or with sandpaper.

There are a huge number of fun things you can play with your children. Undoubtedly, these are outdoor games. At the same time, an integral advantage of a wooden toy is its durability. The same cannot be said about plastic analogues.

How to make a simple machine from wood

To diversify your child’s games, you can make a simple wooden machine. It won't take much time, but first you need to prepare everything you need.

Tools:

• Circular saw;
• Drill;
• Jigsaw;
• Sharpener 10 cm.
• Sandpaper;

To simplify your work, print out a drawing of the machine model. The drawing can be easily found on the Internet. Then follow the instructions below:

• Take a block of wood or a piece of thick board;
• Based on a drawing or photograph of a machine gun, carefully mark the boundaries of the future weapon on the tree with a marker;

If you print an image of a machine gun on paper, and then cut it out and use it as a stencil, the product will turn out to be very realistic. After all, all proportions will be maintained.

• Start cutting straight lines using a circular saw;
• Pay special attention to cutting out the curved parts of the machine. To do this you need to use a jigsaw;
• Use a sharpener to contour the weapon;
• To make the machine more interesting, do not forget to drill holes such as the barrel;
• Polish the resulting weapon using sandpaper by hand;
• Take a small piece of wire, preferably aluminum, to construct the trigger;
• At the end, paint the machine or varnish it;

This wooden toy machine is quite easy to make and will bring a lot of joy to the child.

How to make a realistic Kalashnikov assault rifle

A realistic model of the machine can be made at home using available tools. So, here is a list of things you will need:

• Thick and wide board (thickness should be at least 4 cm);
• Wood handle (quite thin);
• Plywood sheet;
• PVA glue;
• Dye;
• Jigsaw;
• Milling machine;
• Sandpaper;
• Magnets;
• Marker;

First, choose the necessary material for work. It is better to choose a pine board.

When choosing wood for a product, please note that there should be no knots or splinters on it.

We make a sketch on the wood. Using a marker we outline the outline of the future Kalashnikov. It is worth considering that the magazine will be separately attached to the machine, so you need to draw it separately. When the image is ready, begin to carefully cut out the blank using a jigsaw.

In order for the magazine to be securely attached to the base of the weapon, you need to try it on and sharpen it several times. Nothing should get caught, only in this case the child will be comfortable while playing.

Use a milling machine to add volume to the product. To do this, it is necessary to chamfer the handle, as well as the butt. Subsequently, sand the workpieces as best as possible.

Take the prepared side parts, cut from plywood, and glue them to the main part of the machine, generously smearing them with glue. Special attention It is worth paying attention to the contour of the workpiece. Then press all the parts for more reliable gluing, and leave for several hours until completely dry. As a result, it is worth sanding the product again so that the plywood parts do not stand out.

Start modeling the barrel of the future wooden machine gun. At this stage you will need a thin cutting (you can make it yourself or purchase it in the construction department of the store). You also need to cut out the front sight and drill holes in the machine gun in order to later fasten the barrel. Lubricate all parts with glue at the fastening points. After the machine is completely assembled, give it time to dry.

At the final stage, start painting the resulting machine model. You can use dark paint or varnish.

If you prefer paint, use water-based paint. It's safer.

To make the magazine more securely attached to the machine, it is necessary to use magnets. If the purchased magnets are in the shape of a tablet, then before gluing them, it is worth drilling small holes in the magazine and the inside of the machine. The diameter of the holes must match the diameter of the magnets. If you purchased a roll-type magnet, then glue a piece of the magnet the desired shape and size to the inside of the machine. In this case, a metal plate must be glued to the magazine. It is better to choose quick-drying glue or superglue.

Now the wooden machine gun is ready. This weapon model is very interesting and realistic, which means it will undoubtedly be in demand among children.

How to make a toy machine and wood

Before you start working on a future toy, carefully draw a sketch of the future machine and transfer it to the material from which the product will be made. In this case, each detail must be drawn separately.

Make sure that the entire set of tools necessary for the job is at your fingertips. For the initial finishing you will need: hammer, chisel, hatchet, plane, wood hacksaw, metal hacksaw, drill, level.

For harvesting, you should choose wood from coniferous species. And on the blank, leave at least 15% of the material as a reserve. This is required for subsequent adjustments to the shape of the product. All elements of the future machine are cut out separately.

After all the parts are cut out of the wood, you need to move on to the sanding stage. For achievement desired result use the following sequence. First, file each piece using files. Then use coarse sandpaper first and then fine sandpaper to bring the surface of the product to the required level of smoothness.

At the last stage, start decorating the future toy. To do this, coat the surface of the wood with varnish, preferably in two layers. Pre-prime the areas where the paint will be applied.

Give toy machine dry. And you can start playing.

How to make a Schmeisser machine gun

You can make a machine gun from wood different ways. It all depends on your skill and the materials you have at hand.

To make a machine model you will need:

• Wooden slats - 2 pcs.;
• Super glue;
• Nails;
• Espagnolette;
• Hacksaw;
• Sandpaper;

The boards or slats that will be used must be at least 50 centimeters long. We saw the first strip lengthwise in the middle, leaving only a third. While the lower part needs to be removed. We divide the second rail into two unequal segments. The longer part will be the magazine, and the short part will be the handle of the future machine gun.

The prepared parts of the product must be sanded using sandpaper. Then fasten all the parts together using glue.

Also, any weapon needs a front sight. Make it from a nail, carefully driving it into the upper part of the barrel. Make the trigger in a similar way. Attach a latch to the side of the machine as a bolt.

At the final stage, sand the future toy again with sandpaper. Then cover the entire machine with dark paint. And let the product dry.

Now you can enjoy playing this slot machine and win new victories.

How to make a simple Schmeisser

It often happens that there is not enough time to create a complex machine model. But this is not a problem, because a simple Schmeiser can be made from scrap materials. You will need:

• Chisel;
• Nails;
• A pair of wide slats;

Divide one of the slats into two parts. It is desirable that one of the halves is longer than the other.

On the second rail, cut out several pieces in the area of ​​the future trunk. Also in the opposite part, saw off a piece of wood so that you get an acute angle. This will be an improvised butt of a machine gun.

Finally, use nails to attach the magazine and the handle to the main part of the toy.

How to make a dummy machine gun from wood

Often, ordinary plywood is an excellent material for creating a dummy. Using one of the methods, you can easily make a machine model with your own hands.

To work you will need the following “basic” tools and accessories:

• Plywood. It is not necessary to use a whole sheet of material; in most cases, scraps are sufficient. However, it is important that the pieces are of the appropriate size and thickness. Sometimes it is worth choosing thicker plywood, since during use the layout may be subject to significant loads;
• Tools. This list includes both devices for grinding and cutting. To make various recesses and holes on the surface of the dummy, you need to have a carpenter's knife or chisel on hand. While for sanding several sheets of sandpaper of varying degrees of grit are sufficient;
• Protective covering. The future product must first be coated with a special compound that protects it from moisture. And then cover the dummy with wear-resistant paint. Black wood paint is most often used. But you can also use silver.
• Glue. In order for all parts of the machine to be securely fastened, it is necessary to use epoxy resin as glue. If it is not available, then you can get by with PVA glue. And in some cases even superglue;

To create a real dummy, you need to find a sketch of a real machine in advance. It is advisable that all exact dimensions are indicated on the drawing.

When all the components of the future dummy have already been cut out of plywood, you need to glue them together and securely fasten them until they dry completely. Clamps will be very useful in this process. They will securely fix all the parts together.

In order for the “blank” to take the shape of the desired machine, it is necessary to recreate all the holes and recesses. Use a jigsaw for this, first drilling the holes and then shaping them.

The dummy must have a realistic appearance. This means you will need to work hard. If you do not have enough experience working with cutters, it is better to start with simpler parts. Otherwise, you may accidentally damage the product and the work will have to start from scratch. However, the result should please you with its similarity to the original.

Pay special attention to sanding. To give the necessary smoothness, carefully sand the dummy with sandpaper. First, go over the entire surface with coarse sandpaper. For example, marked M - 100. And then use small paper for finishing.

Of course, it is necessary to paint the dummy. Please note that the colors must match the original of this machine model. Choose paints of the desired shades.

How to make a machine gun that shoots rubber bands

Any machine gun model presented above can be modified by adding the ability to fire.

The easiest way is to attach a small handle to one of the sides of the machine. A thin lath may also work. The “trigger mechanism” can be installed either from above or from the side. The main thing is that it is comfortable for small children's hands.

You can attach the cuttings using nails or superglue. The main thing is that the fastening is reliable.

Another thing necessary for shooting is a rubber band. It is better to use so-called “bank” rubber bands. They cost very little and are the perfect size. There may be a couple of these rubber bands in your organizer. To charge the weapon, weave two rubber bands, attach a paper clip to one of them. If possible, it is better to make several charges. To fire the shot, carefully grasp the paperclip. In this case, the elastic band must be stretched to the very edge of the handle. And then release the paperclip.

Try not to point the weapon at people or animals, as the shot can have significant force and cause harm to others.

How to modify a machine

In order for a wooden weapon to be fully equipped, in addition to the machine gun itself, you will need a bayonet, a knife and a belt to carry. This will be especially true if the toy was made of dense wood.

The belt can be made of canvas tape. And it is attached to the machine with two rings of metal wire, or in pre-cut holes. Also, for more comfortable wearing, you should make a “double loop” from the tape. To do this, you will need a piece of a weapon belt twice the standard length and a ring made of thick wire. First, we attach the belt to the machine gun, so that one of the edges is fixed near the barrel, then we thread the belt into the prepared ring and draw it closer to the base of the barrel. We pass the middle of the tape through the fastening near the butt. If everything is done correctly, there should be a long “tail” of the belt, to the edge of which it is necessary to sew a ring made of durable metal, which remains hanging on the fixed section of the belt.

In the future, it is the elongated part of the belt that is put on the person, and the machine gun remains hanging on it. This option of carrying a wooden weapon will allow the child to play carefree, without having to hold the machine with his hand all the time. However, when calculating the length of the belt, it is worth considering that in a free position, the barrel should not touch the ground.

Now your dream wooden machine has been created and is fully equipped!

Children often ask their parents to make them some kind of toy from wood. The boys demand that weapons be made for them, with which they could continue endless backyard “wars.” The best option for a child there will be a wooden replica of the 47th How to make an AK-47 from wood? If you have the right tool, even a beginner can cope with this task. Information on how to make an AK-47 from wood with your own hands is presented in the article.

Where to begin?

For anyone who is interested in how to make an AK-47 from wood, craftsmen recommend that you first of all acquire high-quality raw materials. The product will be reliable and strong if you use a pine board with a thickness of at least 50 mm. In addition, you need to have a corresponding drawing.

About production

All elements of the machine are made of wood. For those who don’t know how to make an AK-47 out of wood so that the dummy looks as realistic as possible, experienced craftsmen recommend equipping the product with a detachable magazine. The blank of the future product is cut out of the board using a jigsaw. For the side walls of the machine you will need two sheets of plywood. In the future, they will cover the magazine mount. It can be made from the same board as the dummy machine gun. The movement of the magazine in the fastening mechanism will be carried out without delay if all the corners are carefully ground in it using a file and then a grinding machine. PVA is suitable for gluing the side walls. The process can be optimized using a tool such as clamps. Securely fastened parts to be joined should be left to dry for several hours.

About the dummy barrel

For this element you will need a cylindrical blank. You can make it yourself on a lathe or purchase a ready-made product in a store. The barrel must be equipped with a front sight. You will have to cut it out of wood yourself. In addition, the stock must be equipped with holes for the muzzle of the machine gun. They will turn out smooth if you work on a special drill stand. After the bore holes are ready, cylindrical blanks are inserted into them. Then the already turned and carefully sanded front sight is glued to the barrel using PVA.

About painting work

In addition to the question of how to make an AK-47 from wood, many are also interested in what paint is best to coat the finished product. The dummy will look very realistic, experts advise, if oak-colored paint is applied to it.

It is made on a water basis. The dummy painted black also looks good. Some craftsmen also coat their products with varnish on top of the nitro paint.

A do-it-yourself automatic machine made of wood or the story of how I made a Kalashnikov...

I decided to please the son of one of my good friends and make him a wooden toy. To my question: “what should I do?”, my friend answered immediately: “maybe some kind of pestle?” Not a bad idea, I thought, and went into arms production. True, I decided not to waste time on trifles and instead of a “pestle”, make a machine gun right away! Still, no matter how you look at it, every kid knows that a machine gun is cooler than a pistol! :))

I decided to take the legendary Kalashnikov as a basis. I want to say right away for all connoisseurs of modeling and accurate models: the task was, first of all, to make a reliable and strong toy, so I did not try to recreate the machine in all its details, but made a conditional copy!

A thick 50-gauge pine board was chosen as the building material. I just took a pencil and sketched out the outlines of the future machine by hand, using a picture from the Internet as a guide.

I don’t like any kind of nails, brackets, or wires, so I decided to make the trigger out of wood too. It’s more reliable and more pleasant to the touch! :)

I immediately figured out and drew a mounting system for the store. The detail seems small, but very significant, without which the machine gun will not be a machine gun, but just... a fart for kids. After all, if a machine gun has a non-removable magazine, then such a weapon is worthless! :))) The photo below shows prototypes of the future store. :)

Then I cut out the workpiece using an electric jigsaw. The result is a blank like this.

After that, I cut out the side “walls” of the machine gun from thin plywood, covering the mounting location for the magazine.

Once again I looked around the store. For it I used the same board as for the main workpiece.

I sawed out and sharpened the corners with a file so that nothing would touch and the parts could move freely.

Next, on the milling table, I chamfered the butt and handle, so that I could then use a grinder to finish what I started and finally round the corners.

I glued the side walls with PVA glue.

I secured them with clamps and left them to dry.

I went through the corners with a router and in the end I got something that already resembled that same Kalashnikov! :) Then I polished everything with a sander.

Now you can work on the barrel of the machine gun. To do this, I used a cylindrical blank purchased in advance at a hardware store. At the same time, I cut out the barrel part, the front sight and drilled all the necessary holes.

For drilling I used a special drill stand. Without it, making an even and perpendicular hole is a task for those whose hands do not shake and have a diamond eye. I decided to make my life easier and took advantage of this convenient device.

The barrel parts are ready, all that remains is to place them on PVA glue.

All details and dimensions are complete improvisation! I just looked at the drawing of the machine and made it “approximately like in the picture.” In the end, it turned out well. What do they say there? You can't praise yourself...))

I adjusted the magazine and lo and behold, a legendary machine gun appeared in front of me, which turned out to be quite similar to the original. Although there will probably be critics and dissatisfied people, but excuse me, guys, it was possible, it was possible! :))

I know that many would paint the machine the way it should be in the original, I saw how some use black nitro paint, and the wood is almost always covered with a thick layer of varnish. I am a specific person in this matter. Covering the texture of wood with paint and covering up all the tactile sensations it gives with varnish - for me, this is like pasting wallpaper on a beautiful fresco! :)) But in no case do I pretend to be the ultimate truth, everyone does as they see fit, according to their own understanding and taste! :)

There's just one small detail left to secure the magazine. For this I used small magnets. Since I didn’t have specially purchased ones on hand, I took them out of an old children’s construction set, from which my children only had a couple of parts. The rest was lost somewhere.

Description of the presentation by individual slides:

1 slide

Slide description:

Municipal budgetary educational institution "Verkhovskaya secondary Comprehensive school No. 1" Oryol region, Verkhovye village Making a model - a copy of the Kalashnikov AK-74 assault rifle Completed by: 9th grade student. Ivan Andriyanov Head: technology teacher Oleg Ivanovich Martynov, Verkhovye village, 2015

2 slide

3 slide

Slide description:

Selection and justification of the project idea I am in the 9th grade, I am interested in technology, the history of weapons, and I love tinkering. I really enjoy the technology classes. I decided to prepare creative project and take part in the Technology Olympiad. The teacher advised me that the topic for the project should be the development of a product suitable for production by students in technology lessons and in the circle “ Skillful hands" The product must be easy to manufacture, technologically advanced, made from available materials, and cheap to produce. When working on it, as many different operations as possible should be used for processing wood and metal with hand tools and on machines. In lessons, we usually made pointers, mallets, boxes, and benches. mops, but that wasn't very interesting. I thought that usually guys like to play war, are interested in weapons, and decided to develop and make a model of some kind small arms. In addition, it will be useful for the school Youth Army team. 1

4 slide

Slide description:

Goals and objectives Goal: To create an original, technologically advanced, cheap product, suitable for production by schoolchildren in technology lessons and in a circle, needed for school. Objectives: 1. Learn to mentally imagine an object and graphically express it in the form of a technical drawing and drawing, work with design and technological documentation. 2.Know and correctly perform various technological operations for processing wood and metals. 3. Really evaluate your knowledge and skills. 2

5 slide

Slide description:

Selection of product options Having considered several models of the AK assault rifle, I chose option No. 4 of the AK-74 model with a wooden butt, deciding that the model of this assault rifle made of wood would look more impressive. 1 2 3 4 3

6 slide

Slide description:

Short story creating a machine gun “Weapons don’t kill, people kill.” M.T.Kalashnikov During the Great Patriotic War there was a need to translate the main small arms Red Army for 7.62 mm cartridge. The main advantage of such a cartridge is sufficient destructive power at medium distances in comparison with pistol cartridges, and the lighter weight of the intermediate cartridge in comparison with a rifle cartridge allows the fighter to carry more ammunition. After creating an intermediate cartridge of 7.62 mm caliber. in 1943, active development of small arms began, in which the most famous designers of the USSR took part. Kalashnikov also took part in the competition. Its development showed good results, which allowed it 4

7 slide

Slide description:

move on to the second stage of the competition. In 1947, Kalashnikov presented a modified version of the assault rifle he had developed, which was subsequently adopted in 1949. The first Kalashnikov assault rifles had two modifications: with a wooden non-folding stock (AK-47) and with a metal folding stock (AKS-47). Kalashnikov created a practical and reliable weapon. The merit of the developer is the optimal arrangement of time-tested technologies into a single sample that met all the requirements. Despite the fact that the Kalashnikov assault rifle entered service with the SA back in 1949, due to Soviet secrecy, the weapon was introduced only in 1956. In the 50s, models of medium small arms began to be replaced by Kalashnikov assault rifles. It soon became the main type of small arms in the allied countries of the USSR, as well as in Finland and some other countries. Such a rapidly growing popularity of the machine was associated with the simplicity and reliability of the design. as well as the low cost of weapons. In the early 70s, the USSR began developing a new automatic cartridge of 5.45x39 caliber. In 1974 chambered for 5.45 cartridge into service Soviet army a new AK-74 assault rifle is being adopted. More than 60 years have passed since the creation of the first version of the Kalashnikov assault rifle. The famous developer managed to achieve his goal: “to develop a weapon that would be understandable to a common soldier.” Indeed, the Kalashnikov assault rifle is very popular 5

8 slide

Slide description:

on all continents. The Kalashnikov assault rifle is one of the most popular weapons in the world. It is in service with the armies of 106 countries. Recognized as the invention of the century and listed in the Guinness Book of Records as the most common weapon in the world. For his assault rifle, Kalashnikov received the Stalin Prize of the first degree. 6

Slide 9

Slide description:

10 slide

Slide description:

Selection of materials To make my product, I used the most accessible and cheapest material - wood, metal scraps, wire. For the receiver, magazine horn and handle, it is advisable to use birch, since its wood is dense, hard and does not have pronounced annual layers, but it is suitable and pine, spruce. For turning the barrel and gas tube, only birch should be used. Birch. It has a very uniform structure, light color, closer to white, sometimes with a yellowish tint. Used for making plywood, tool handles, furniture, etc. Spruce. The wood is white with a yellowish tint, knotty. Used for the manufacture of musical instruments and in construction. Pine. The wood is reddish-yellow, has no a large number of knots. Used in the construction of bridges, carriages, flooring, etc. Tin. Galvanized sheet metal 0.2 mm thick, bends well, is cut with scissors, and processed with a file. Used to make a trigger bracket, a translator lever, and a front sight. sighting bar. To finish the finished product, I used black enamel, and for the buttstock, a walnut wood texture. 8

11 slide

Slide description:

Selection of tools and equipment When making my product, I used the following tools and equipment: Pencil Ruler Scratcher Vernier caliper Square Carpenter's workbench Mechanic's workbench Drilling machine Lathe STD-120 Lathe TV-6 Electric drill Hacksaw Bench scissors Rasp Planer Chisel Mallet Oobzik Milling cutter Shaping sandpaper Brush 9

12 slide

Slide description:

Preparation of technological documentation I carefully studied the design and types of the Kalashnikov AK-74 assault rifle. Having removed all dimensions from a full-size metal model of a machine gun available in the life safety class, I, with the help of the teacher, developed the technology and procedure for manufacturing individual parts, drew and cut out of cardboard templates for the body with the butt, magazine, and handle. Completed drawings and technological maps for the manufacture of the main parts of the machine. The templates will later be used by other students to make a machine model. 10

Slide 13

Slide description:

Slide 14

Slide description:

Specification Receiver with butt. Gas tube with cover. Front sight. Sighting bar. Shutter lever. Translator flag. Barrel with compensator. Ramrod. Cleaning rod brackets. Shop. Trigger bracket. Pen. Trigger. 12

15 slide

Slide description:

Technological maps for manufacturing the main parts of the Kalashnikov assault rifle AK - 74 13

16 slide

Slide description:

Routing No. 1 Making a receiver with a butt 14 No. Name Quantity Scale Material 1 Receiver 1 1:1 Birch

Slide 17

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 1. Select a workpiece required sizes. Ruler, pencil, hacksaw 2. Apply the contours of the future product to the workpiece according to the template. Template, pencil 3. Cut out the part from the workpiece along the lines. Carpenter's workbench, jigsaw, clamp 4. Mill the ribs in the upper part of the receiver. Carpentry workbench, router, clamp 5. Process the stock according to the sample. Carpenter's workbench, plane, rasp, knife 15

18 slide

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 6. Drill a hole with a diameter of 20 mm to install the barrel. Drill, drill bit 7. Drill holes with a diameter of 20 mm. Drill, drill bit 8. Drill out the sockets for installing the magazine and handle. Carpentry workbench, chisel, chisel, mallet 9. Finish the finished product Sandpaper 16

Slide 19

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 1. Select a workpiece of the required size. 2. Apply the contours of the future product to the workpiece according to the template. Ruler, hacksaw Template, pencil 3. Cut out the magazine horn along the lines from the blank. Jigsaw, carpenter's workbench, clamp 4. Mill the ribs of the front edge of the part. Carpenter's workbench, router, clamp 5. Apply marks on the sides of the front edge of the magazine with a burner. Carpentry workbench, pencil, electric burner Technological map No. 2 Making a machine gun barrel No. Name Quantity Scale Material 1 Barrel 1 1:1 Birch 17

20 slide

Slide description:

Sequence of technological operations Graphic representation Tools, equipment Select a workpiece of the required size. Ruler, hacksaw 2. Process the workpiece in the form of an octagon and mark the centers. Planer, punch, hammer 3. Fix the workpiece in a lathe and turn it to a diameter of 26 mm STD-120 lathe, chisels, calipers 4. Perform further turning according to the drawing STD-120 lathe, chisels, calipers 5. Perform finishing work finished product. Lathe STD-120, sandpaper 18

21 slides

Slide description:

Technological map No. 3 Manufacturing of a gas tube with an overlay No. Name Quantity Scale Material 1 Gas tube 1 1:1 Birch 19

22 slide

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 1. Select a workpiece of the required size Ruler, pencil, hacksaw 2. Process the workpiece in the form of an octagon and mark the centers. Carpenter's workbench, plane, center punch, hammer 3. Fasten the workpiece in the lathe and grind to a diameter of 39 mm. STD-120 lathe, chisels, calipers 4. Carry out further turning of the part according to the drawing. STD-120 lathe, chisels, calipers 5. Cut off the lower part of the part by 5 mm and perform finishing. Carpenter's workbench, plane, sandpaper 20

Slide 23

Slide description:

Technological map No. 4 Manufacturing of the machine handle No. Name Quantity Scale Material 1 Handle 1 1:1 Birch 21

24 slide

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 1. Select a workpiece of the required size. Pencil, ruler, hacksaw 2. Apply the contours of the future product to the workpiece according to the template. template, pencil 3. Cut out the part from the workpiece along the marking lines and round the edges of the side faces. Carpenter's workbench, clamp, jigsaw, rasp 4. Apply a pattern to the side surfaces of the handle with a burner. Carpentry workbench, pencil, ruler, electric burner. 5.Perform final finishing of the part. Sandpaper 22

25 slide

Slide description:

Technological map No. 5 Manufacturing of magazine horn No. Name Quantity Scale Material 1 Magazine horn 1 1: 1 Birch 23

26 slide

Slide description:

Sequence of technological operations Graphic representation Tools, equipment 1. Select a workpiece of the required size Ruler, pencil, hacksaw 2. Apply the contours of the future product to the workpiece using a template. Pencil, template 3. Cut out the part from the workpiece. Carpenter's workbench, clamp, jigsaw 4. Mill the ribs of the front edge of the part. Carpenter's workbench, clamp, router 5. Apply marks to the front edge with a burner and complete the final processing of the part. electric burner, sandpaper 24

Slide 27

Slide description:

Safety precautions when working with tools and machines When manufacturing a product, you must know and strictly follow the rules for the safe operation of all technological operations performed, use work clothing and protective equipment. 25

28 slide

Slide description:

Stages of manufacturing the product The sequence and main stages of manufacturing the machine are presented in the figures. The following technological operations were performed: Marking Sawing Planing Drilling Chiselling Sawing Metal cutting Metal chopping Filing Metal bending Turning Soldering Wood burning milling Finishing 26

Slide 29

Slide description: