How to set the BIOS to boot from a flash drive on an Asus laptop

Let's start with the fact that the need to set the BIOS to boot from a flash drive on a laptop may arise due to the fact that the gadget simply does not have a CD/DVD drive.

If for this or any other reason you need to boot from a flash card, then follow the instructions below.

If situations arise where diagnostics are necessary or renovation work specialists, you can contact our service center for professional repair and maintenance of ASUS laptops.

What needs to be done before the boot process in BIOS from a flash drive

In order to reinstall the operating system on a laptop in this way, you will need to create a bootable USB flash drive from which the installation will take place. If all the drivers for the gadget are also on disk, you should copy them to a flash card.

If, for example, you are going to install Windows 7 on an Asus laptop, then you can create a bootable USB flash drive using auxiliary utilities, for example, “Windows 7 USB/DVD Download Tool”. You can use an alternative solution and use the UltraISO program to create a bootable flash card. If the flash drive is ready, then you can safely go into BIOS system and install boot from it.

How to set the BIOS to boot from a flash drive on an Asus laptop

We can enter Bios on an Asus laptop by pressing the F2 key. Press it immediately after launching the gadget. If this option does not work, which is rare and depends on the model, then try pressing the DEL button again, as this usually solves the problem.

When you do all this, the flash card should already be connected to your computer:

If you did everything correctly, now after rebooting the laptop, you will see Windows boot from a flash drive.

Full description

Technologies of the 21st century are more and more pleasing with a variety of unique new products. We can no longer imagine our life without the Internet. If you modern man, you should know about Wi-Fi technology. This is an adapter wireless network 802.11n standard.

Your connection will always be secure. Impressive speeds (up to 300 Mbps) are the advantage of the N13. A special built-in antenna of a universal design will provide a stable connection and, of course, a wide range. The device supports Enterprise WPA2/WPA mode, this allows you to authenticate users on a corporate network based on a simple certificate, and this guarantees a high-speed and secure wireless environment.

EZ WPS is a simple and at the same time quick setup of a secure connection. You just need to insert the Asus Wi-Fi adapter into the USB port of a regular computer and simultaneously press the special WPS button on the wireless router, as well as on the adapter. To complete setting up a secure connection from the user, you only need to complete 2 simple steps.

Asus owns the wonderful PSP Xlink Kai program. Xlink Kai is a modern free program, allowing PSP owners to play Online Games through the Internet. In order to start a wireless battle with the enemy, just install the Xlink Mode (PSP) in the ASUS utility - this will allow your device to connect to the modern Xlink game server. What could be better for game lovers? Fight people from anywhere in the world with this device!

Supports a wide variety of operating systems (Windows, Mac, Linux). The latest OS Windows 7 is also supported!

While on a business trip, for example, you can use a USB adapter to share Internet access. A special software implementation of the “Access Point” mode will allow users to create a small wireless network, and even connect various modern wireless devices to the Internet through an existing connection ( new feature Internet Connection Sharing).Using the optional Access Control List feature, you can manage user access rights.

Do you want your adapter to look beautiful and stylish? Wi-Fi will look great on your desktop as it has an attractive design.

Do you travel often? This adapter small size, which means you can easily carry it with you. This is a high-quality device for high-speed exchange of various data over a wireless network, as well as video streaming applications.

You can easily and simply set up this Wi-FI adapter. The instructions for this wireless adapter are simple and straightforward. This means that people who are not particularly tech savvy will be able to set it up easily.

Always stay connected!

Hi all! Yesterday I got my hands on a new ASUS X501A laptop. It was necessary to install Windows and everything necessary, turnkey in short :). I turned it around and discovered that it does not have a CD/DVD drive. This means that you need to create a bootable USB flash drive and install Windows 7 from it. The drivers for it are also included on the disk, and you also need to copy them onto the USB flash drive. It’s actually strange that the laptop doesn’t have a drive, but the drivers are on the disk. You need to put the included drivers on the flash drive, or an external drive :).

Anyway. I created a bootable USB flash drive. First created using special program Windows 7 USB/DVD Download Tool(I wrote about this), but I’ll say ahead of time that for some reason the installation of Windows 7 from this flash drive did not work. The white cursor simply blinked and the installation did not continue. I recorded it and everything worked. Why this is so, I didn’t bother to figure it out :).

That's it, the flash drive is ready. Now you need to set the BIOS to boot from this flash drive. Now I’ll tell you how to do this.

We set boot from a flash drive on an Asus laptop

We go into the BIOS. For me, and most likely for you, this is the key F2 (if not, then try DEL). Press it immediately after starting the laptop.

The flash drive should already be connected to the laptop!

As you can see (in the screenshot below), under me Boot Option #1 costs HDD. And under Boot Option #2 flash drive. You need to install a flash drive under #1.

To do this, click on Boot Option # 1 and select the flash drive. And the hard drive will automatically take second place.

You can return to the previous menu by clicking on Esc and you will see that a USB device is installed under Boot Option #1.

Don't forget to click F10 And Yes to save settings.

That's it, after rebooting the laptop it should boot from the flash drive (if it is created correctly).

There is one caveat. Perhaps I made a mistake when setting the parameters in the BIOS; there I probably just needed to create another boot rule (Add New Boot Option). But it's okay.

If you did everything like I did, then most likely during the Windows installation process, after a reboot, booting from the flash drive will begin. Is it necessary with drive C to continue installation. I'm just at the point of rebooting pulled out the flash drive. And when the download started from drive C, I inserted it back (although it seems that it is no longer needed for installation, the files have already been copied, but I could be wrong).

Possible problems when installing Windows 7 from a USB 3.0 flash drive

You may have noticed that my USB drive has the new USB 3.0 interface. But Windows 7 does not support USB 3.0, special drivers are required.

If the drive itself is USB 3.0, then it's okay. Just plug it into the laptop connector USB 2.0 and everything will work.

This is what a USB 2.0 connector on a laptop looks like:

And this is what a USB 3.0 connector looks like:

The third one is blue and there are two letters SS next to the icon.

Well, if you have everything USB 3.0, then you will have to integrate the drivers into Windows 7. This is a topic for another article. Perhaps I’ll write how to do this. In the meantime, you can find this information on the Internet.

You can also find and download an assembly with Windows 7, which already has integrated drivers for USB 3.0. There are such people.

This site probably has all the information that may be useful for installation. operating system and to resolve problems that may arise during the installation process. You can use the site search. And if you can’t find something, then ask in the comments, I’ll tell you :). Good luck!

Also on the site:

How can I set the BIOS to boot from a flash drive on an Asus laptop? Some tips for Windows installation 7 from USB 3.0 flash drive updated: February 7, 2018 by: admin

ASUS laptops have gained popularity for their quality and reliability. Devices from this manufacturer, like many others, support booting from external media such as flash drives. Today we will look at this procedure in detail, and also get acquainted with possible problems and their decisions.

IN general outline the algorithm repeats, but there are several nuances that we will get acquainted with later.

  1. Of course, you will need the bootable USB flash drive itself. Methods for creating such a drive are described below.

    Read more: Instructions for creating a bootable USB flash drive with and

    Please note that at this stage, problems most often arise, described below in the corresponding section of the article!

  2. The next step is setting up the BIOS. The procedure is simple, but you need to be extremely careful.
  3. The next step is to directly boot from an external USB drive. Provided you did everything correctly in the previous step and did not encounter any problems, your laptop should boot correctly.

If problems occur, read below.

Solving possible problems

Alas, the process of booting from a flash drive on an ASUS laptop is not always successful. Let's look at the most common problems.

BIOS does not recognize the flash drive

Perhaps the most common problem with booting from a USB drive. We already have one, so we recommend that you use it first. However, on some laptop models (for example, ASUS X55A) there are settings in the BIOS that need to be disabled. It's done like this.


The second reason for the problem is typical for flash drives with Windows 7 recorded - this is an incorrect partition layout scheme. For a long time The main format was MBR, but with the release of Windows 8, GPT took over. To deal with the problem, rewrite your flash drive with the program by selecting “Scheme and type of system interface” option "MBR for computers with BIOS or UEFI", and install the file system "FAT32".

The third reason is problems with the USB port or the flash drive itself. Check the connector first - connect the drive to a different port. If the problem is observed, check the flash drive by inserting it into a known working connector on another device.

Touchpad and keyboard do not work when booting from a flash drive

A rare problem typical for laptops latest versions. The solution is absurdly simple - connect external control devices to free USB connectors.

The ASUS USB N13 wireless adapter is indispensable in cases where you need to connect a personal computer to a computer network without using wires. This short review is dedicated to its specifications and configuration procedure. Owner reviews will also be given, strong and weak sides the device in question.

Areas of application

To operate in normal mode, ASUS USB N13 requires a universal serial port of the USB standard. Its version can be 1.X, 2.0 or 3.0. In addition to this, a control computer system is needed, which can be any laptop or desktop system unit. From the position software For normal operation of the adapter in question, drivers are required.

Therefore, it is most rational to use such a wireless network card as part of personal computers that do not have a built-in Wi-Fi transmitter, but there is a need for such a connection.

Equipment

ASUS USB N13 includes the following components:

  1. The wireless adapter discussed in this review has a special removable cap.
  2. A disk on which you can find drivers and documentation.
  3. User's Guide in short format.
  4. Warranty card.

There are no comments to the previously given list. The eminent and world-famous manufacturer included everything you need to start the device for the first time. There should also be no problems with further operation.

Main technical parameters

Next specifications declared by the manufacturer for the ASUS USB N13 Wi-Fi adapter:

  1. The connection interface is USB. Also, for the normal functioning of such a network card, you need a free physical port of the same name.
  2. The peak speed of receiving and sending information is 300 Mbit/sec.
  3. Antenna type - built-in.
  4. List of supported wireless standards 802.11 b/g/n. But such an adapter is not able to work with the outdated 802.11a and the newest 802.11ac. But this is not critical for the reason that the first of them is extremely rare in practice, and the latter has not yet become widespread. In addition, 802.11ac is backward compatible with 802.11n.

Among other features of this device, we can note the presence of support for ASUS proprietary technology EZWPS. With its help, the level of security of the network connection, which is implemented using such an adapter, is further increased.

Setting procedure. Checking the functionality of the wireless network card

The ASUS USB N13 adapter is configured as follows:

  1. Carefully remove the external wireless transmitter from the plastic transport box. Let’s not forget about the other delivery components, the list of which was previously given.
  2. We find a free USB connector on the computer and install the device in question into it. In this case, you must first remove the protective cap from the network card connector.
  3. Then you need to install the drivers from the CD and restart the PC.
  4. At the next stage, we launch the search procedure for available connections. In the list that appears on the screen, select the SSID of our network. After this, you need to enter a password to gain full access to it.
  5. Launch the browser and check the functionality of the created connection.
  6. At the end, it is recommended to visit the official website of the ASUS company, download latest version drivers and install them.

After this, the adapter configuration is completed, and the network connection is fully implemented.

Price today

Currently, the ASUS USB N13 Wi-Fi network card can be purchased at prices ranging from 950 to 1200 rubles. If you make a purchase in an online store, the price will be closer to the first value. But there will be a time delay associated with the delivery of this device. As a rule, this is 2-3 days. If you need such an adapter urgently, you can overpay 200-300 rubles and buy it at the nearest electronics supermarket. In this case, the network card will be provided instantly.

Strengths of the network adapter and main disadvantages. User reviews

Owners indicate in reviews the advantages of this network card model:

  1. Affordable price.
  2. Excellent level of functionality.
  3. Simple setup algorithm.
  4. Reliability.

Its only disadvantages include the lack of support for wireless standards versions 802.11a and 802.11ac. But the first of them, as noted earlier, is outdated and extremely rare. The second one is not yet widely used and is compatible with 802.11n. The latter is fully supported by this wireless adapter model. Therefore, this device essentially has no significant disadvantages.

Conclusion

Really great by today's standards is the ASUS USB N13. But there is no particular demand for such products now. All modern systems are equipped with built-in transmitters of this type. Therefore, such adapters are purchased only in cases where their integrated analogue has failed.