Again When installing and reinstalling the system, many are faced with the question: “How to create an installation flash drive with Windows 7?” Today this topic is very relevant, since many laptop models are not equipped with a DVD drive, and netbooks do not have them at all.

We'll start by preparing the flash drive itself. During the recording process, it will be formatted, so you need to take care of transferring the existing data to safe place. The minimum size of a flash drive is 4 GB. Next important point– find out if the motherboard installed on your computer supports booting operating system from a flash drive. If so, you will need to change the BIOS settings, setting the boot priority accordingly.

Please note: if your netbook, computer or laptop is equipped USB ports 2.0 and USB 3.0, use to connect a flash drive USB port 2.0. Otherwise, Windows 7 installation will fail. Windows 7 does not support USB 3.0.

Bootable and installation USB flash drive with Windows 7 using the UnetBootin program

Download UnetBootin; working with the program does not require installation. To start, select Download for Windows.

In the window that opens, check the ISO image option and select the media.

After the image is found, click open.

We check if everything indicated is correct, click “OK”.

The process of downloading, extracting and copying files will take some time.

Bootable USB flash drive is ready!

Creating a boot-installation flash drive using UltraISO

The UltraISO program is not free, but you can use its trial period - Free Trial.

Download the program, selecting the Russian language, launch it as an administrator and select a trial period.

After starting the program we will see the following picture.

In the taskbar menu, select “File” → “Open”. Specify the path of the iso image.

After the image is found, click “Open”.

At this stage, insert the USB flash drive into the computer. In the taskbar, select the “Bootboot” menu → “Burn image” hard drive».

Before recording the image, you need to format the flash drive.

Select the file system type.

Once the formatting process is completed, click “Burn”.

We are waiting for the recording to finish.


Burning Windows 7 OS to a flash drive is complete!

Creating a bootable USB flash drive using WinSetupFromUSB

The WinSetupFromUSB program can be downloaded from the manufacturer's official website. Select WinSetupFromUSB-1-3.exe.

Extract the program files to a folder. If you are going to install 64-bit Windows 7, run the WinSetupFromUSB_1-3_x64.exe file.

In the program window that opens, the first column already contains the name of our connected flash drive. You must check the Vista/7/8/Server 2008/2012 based ISO box. Clicking on the three dots right side, open the explorer window.

Specify the path to the ISO image and click “Open”.

After clicking the “GO” button, the process of creating a bootable USB flash drive will start.

The process completed successfully.

Creating a bootable USB flash drive using Rufus

Download latest version programs.


This program works without installation, just run it. In the window that opens, in the “Device” column, select the letter of our flash drive. The choice of system interface partition scheme depends on your BIOS version. Most often, for a regular BIOS, the item “MBR for computers with BIOS or UEFI” is used. The second and third points are intended for installing a system with a UEFI BIOS with converting the hard drive to GPT.

If you create a regular bootable flash drive, not UEFI, the NTFS file system is used. The cluster size remains unchanged. To select an ISO image of Windows 7, click on the DVD ROM icon.

How to create a bootable USB flash drive with Windows to install the operating system from a flash drive? Create bootable usb You can use a USB flash drive with the Windows operating system using various programs specifically designed for this purpose.

Now you will learn how to create a bootable USB flash drive for installing an operating system Windows systems, using the free Windows 7 USB/DVD Download Tools.

As the name of the program suggests, it is designed for recording the Windows 7 operating system onto an external USB drive or DVD. This program also allows you to create a bootable USB flash drive with the Windows 8 operating system.

Why might you need such a bootable flash drive? Most netbooks and some laptops do not have an optical DVD drive. In the absence of a DVD drive, these devices have a pre-installed Windows operating system.

In the event that you need to reinstall the operating system, or install a different edition of the operating system, netbook users will have to buy a rather expensive external DVD drive. Using a Windows disc, you can do this if the operating system for some reason does not boot on the computer.

The way out of this situation is to install the operating system from an external USB drive.

In this way, you can install the operating system on a regular computer. You can create a bootable USB flash drive with Windows 7, or a bootable USB flash drive with Windows 8.

Installing an operating system from a flash drive is no different from a regular installation of the Windows operating system from an optical DVD.

The advantage of storing a boot image of the operating system is that an external USB drive takes up little space; is it more portable? and is also resistant to mechanical damage.

If you simply copy files with the Windows operating system to an external drive, you will not be able to create a bootable USB flash drive this way. To create a bootable USB flash drive, you must use a special program.

For creating boot disk will be used with Windows 7 operating system free program Windows 7 USB/DVD Download Tools, manufactured by Microsoft Corporation.

Windows 7 USB/DVD Download Tools works on English language, but it is easy to use and will be understandable to every user.

Owners of netbooks that do not have an optical DVD drive will need to copy the ISO image with the operating system to HDD your netbook, in order to be able to write this image to a flash drive.

To avoid any problems in the future, it is better to use the original image of the Windows 7 operating system or the image of the Windows 8 operating system to install it on your computer. You can activate the operating system after installation on your computer.

download windows 7 usb dvd download tools

After downloading the program to your computer, run its installation. The program installation wizard works in English, but this will not cause any difficulties during the process Windows installations 7 USB/DVD Download Tools.

Bootable USB flash drive in Windows 7 USB/DVD Download Tools

After installing the Windows 7 USB/DVD Download Tools program on your computer, you will need to launch the program from the program shortcut on the Desktop or from the Start menu. Before starting the program, you need to insert the USB flash drive into the USB connector of your computer.

The flash drive will be formatted in Windows program 7 USB/DVD Download Tools. Before formatting, in order not to lose the files on the USB drive, they will need to be moved to another location, otherwise they will be lost after the formatting process is completed.

The entire process of recording an operating system image occurs in several stages and takes four steps.

In the first step, you need to click on the “Browse” button. In the Explorer window that opens, you must specify the path to the ISO image with the Windows 7 or Windows 8 operating system.

In this example, I have selected a disk with an image of the Windows 7 SP1 Maximum 32-bit operating system, which is located on the external hard drive “K:”. After selecting the operating system image, you must click on the “Next” button.

In the second step, you need to select an external USB drive. The program can transfer operating system installation files to a DVD disc. In this case, when you select a DVD optical drive, the program will write the operating system image to a DVD disc.

After selecting the USB drive, click on the “USB device” button.

In the third step, the program detects the connected external USB drive. If several external drives are connected, then select the one on which you will write the operating system image. After this, you will need to click on the “Begin copying” button.

Now the fourth step of the program begins. Windows 7 USB/DVD Download Tools formats the USB drive and then writes an image of the Windows 7 operating system.

The operating system image recording time depends on the power of your computer.

The Windows 7 USB/DVD Download Tools window appears with a message indicating that the process of recording the operating system image has completed. A bootable USB flash drive with an image of the Windows operating system has been created.

In this case, recording an image of the Windows 7 SP1 Maximum 32-bit operating system took me 12 minutes with antivirus enabled.

Now you need to exit the program and then open the USB drive. After opening the flash drive, you will see the recorded files of the Windows 7 operating system on your removable drive.

To install the Windows 7 operating system, or the Windows 8 operating system, you need to insert a flash drive into the USB connector of your computer.

After this, you should turn on the computer. At the very beginning of the boot, you will need to enter the “BIOS” (by pressing the “Delete” key on the keyboard or another one, which is indicated at the bottom of the monitor screen when you start the logo of your computer’s motherboard). In the BIOS settings you will need to set the boot priority from a USB drive.

After this, the process of installing the Windows operating system on the computer begins. The process of installing the operating system is exactly the same as from an optical DVD.

Conclusions of the article

Windows 7 USB/DVD Download Tools allows you to quickly and easily create a bootable USB flash drive for the Windows operating system.

Creating a bootable USB flash drive in Windows 7 USB/DVD Download Tools (video)

That's what he told how to create a bootable USB flash drive with Windows 7 in the Windows 7 USB/DVD Download Tool. This is an official program from Microsoft and it seems to work quite well. But a comment appeared that it was impossible to create a bootable USB flash drive with this program. Maybe so, anything can happen, so I’ll write another way in which you can create a bootable USB flash drive with Windows 7. And this time we will use good program Ultra ISO, I have already written about her more than once on the blog, in various articles.

I think that there is no need to tell us why such a bootable flash drive will be useful to us; if you are reading this article, then most likely you are interested in the question of how to create it, and not why it is needed.

In this way, you can create a flash drive not only with Windows 7, but also Windows XP and Windows 8. Why, you can burn any image, any boot disk, for example Dr.Web LiveCD. Well, if you have already changed your mind about creating such a flash drive, then the image can be written to disk without any problems, I wrote about this in the article.

How to create a bootable USB flash drive with Windows 7?

We will need:

  • UltraISO program. You can download it on the Internet in a couple of minutes, just type in the search engine the request “Download UltraISO”. After downloading, you need to install it. Installation is the most common, but if you don’t know how, then read the article. The program is paid, but when starting just select “Trial mode”. And if you want, you can buy it.
  • A disk image with Windows 7, or any other image that you want to burn to a flash drive. This image must be in the format .iso, I hope you have already downloaded it.
  • Flash drive size minimum 4 GB(this is for Windows 7, if you want to burn a small image, then 1 GB is enough). The flash drive will have to be formatted, and this will destroy all the files on it, so you need either a clean flash drive, or copy all the information from it to your computer in advance.

If everything is ready, then let's begin.

Launch the program Ultra ISO(there should be a shortcut on the desktop and in the start menu). I will show the example of the English version, since I had a problem with the Russian one, all menu items are displayed in an incomprehensible font. But there’s nothing wrong with that, everything is clear and so.

The program has opened, now we need to select the .iso image of the boot disk, in our case with Windows 7. Click “File” and select “Open”.

Find our image, select it and click “Open”.

Now our image is open in the UltraISO program, all that remains is to write it to a flash drive. Click and select “Write Disk Image...”.

A window will open in which we need to specify some settings. Look what's opposite “Write Method:”, the value has been set to “USB-HDD+”. And opposite “Disk Drive” the flash drive we needed was selected.

Now we still need to format the flash drive and we can start recording. Click the button “Format”. Don’t look at the fact that I have a 1 GB flash drive, I just don’t have a larger capacity at hand. You must have a flash drive of at least 4 GB.

A small window will appear in which we will format our flash drive.

Formatting a flash drive will destroy all files on it. So save them to your computer in advance.

Only needed at point "File system" select NTFS, and click “Start”.

A warning will appear, click “Ok”.

That's it, the flash drive is formatted. Closing the window “Format” by clicking on “Close”.

Not every user has a DVD drive; moreover, Lately Rare PCs are equipped with them. But you still need to install the system, and for this it is most convenient to use a bootable USB flash drive. Let's figure out how to install Windows 7 from a flash drive - after all, you won't buy a DVD for this purpose.

Before proceeding with the installation, carefully study this article: various difficulties may arise during the process, which can be solved using one of the methods described below.

The installation process itself can be divided into the following stages:

  • downloading the installation image;
  • computer preparation;
  • creating a bootable flash drive;
  • setting up PC BIOS;
  • Windows 7 installation.

Let's look at each stage in more detail.

Before you burn the image to a flash drive and install the system from it, you need to download it. Today there is a huge number ready-made assemblies operating system, which are equipped with many applications and functions.

Very often in such distributions the default theme or sound scheme is changed. But not all users like such innovations. You only need to download original images, created by Microsoft. A huge headquarters of the world's leading programmers does their job better than some artisanal modifier.

A little lower you will find a button where you can download a torrent file to download the Russian version of Windows 7 with 32 or 64-bit architecture. The file was taken from the official Microsoft website and is completely original. Proceed with the download, and when the download is complete, move on to the next step.

After the file is downloaded, open it using a torrent client. If you don't know how to work with such programs, follow our step-by-step instructions.

  1. First, download the torrent client itself. This will be the qBittoorent application.
  2. Install the program and use it to open the previously downloaded torrent file.

  1. Choose Windows version 7 (in our case it’s professional 64 bit) and click “OK”.

  1. After this, the operating system will begin loading at the maximum available speed.

Getting ready to install Windows 7

First of all, we need to copy to a safe place all the information that is important to us, located on drive C. Each user stores data in their own way, so each user has their own choice of folders for backup. Most often these are folders: “Downloads”, “Desktop”, etc.

You can save files to another logical drive (the one on which the system will not be installed) or to an external drive. You can also use cloud storage, if there is not too much data. For example, the Mail.ru cloud provides 100 GB of free space.

With an eye to the future, remember: while using your PC, you need to store your data on a disk other than the one on which the system is installed. Divide the physical disk into partitions and store your files on any of them except the system one. To install Windows 7, a comfortable volume of 70–100 GB will be (depending on the type and amount of software used).

Another important point that should be taken into account before the installation begins is the drivers for our network card. If, after installing Windows 7, it turns out that there is no driver for the network card, additional difficulties will arise that will have to be solved using a second computer by transferring files from it via a flash drive.

If you just bought a computer, there is not and cannot be any valuable information on it, feel free to move on to the next section, without copying the data.

Create a bootable USB flash drive

In order to create bootable media and begin the operating system installation procedure, we will need:

  • USB flash drive with a capacity of 8 GB or more. Instead of a USB flash drive, you can use simple map memory with card reader;
  • "Seven" installation distribution with .iso extension;
  • a utility with which we will write an image to a flash drive;

Attention! Before you start creating installation media, remember that all data on it will be irretrievably destroyed.

Making installation media using Ultra ISO

A well-known disk imaging program can create bootable media. Let's look at the algorithm for recording Windows 7 to a USB device.

  1. Download and install the Ultra ISO program from the link.
  2. Run the resulting file and check the “I accept the license agreement” checkbox. Proceed to the next step by clicking “Next”.

  1. Using the “Browse” button, select the installation path, then click “Next”.

  1. We don’t change anything here and just move on.

  1. The program is being installed, we are waiting for it to finish.

The Ultra ISO installation is complete, you can run it and go straight to creating a flash drive for installing Windows 7.

  1. The Ultra ISO program can be launched in trial mode, so its functionality will not suffer at all. Click on the button marked in the picture.

  1. Go to the “File” menu and click on the “Open” item.

  1. Select the Windows 7 image we downloaded, and then “Open”.

  1. Go to the “Startup” section and click on the item that we marked in the screenshot.

  1. We make sure that the media we need is displayed in the devices at the top of the window and click on the “Format” button.

Attention! This will destroy all your data beyond recovery. If you have the files you need on your USB drive, save them first.

  1. In the next window, simply click “Start”.

  1. Ultra ISO will once again warn us that all information from the flash drive will be erased. Click "OK".

  1. After formatting is completed, click on “Burn”.

  1. The process of recording “Seven” onto a flash drive has begun. It will take about 5-10 minutes depending on the speed of the drive and the selected OS version.

The recording is complete, our media can be used.

Let's look at a few more options for creating bootable media with Windows 7.

Rufus

This is another program that can create a bootable USB flash drive with “Seven”. First, let's download it.

The application, unlike Ultra ISO, does not require installation, so you can run the downloaded file and immediately proceed to the process of burning the OS to a USB device. To do this we do the following:

  1. Select the recording device. This will be our flash drive, in this case – 16 GB. Then click on the disk icon.

  1. Select the distribution we downloaded in the PC folder.

  1. We begin the recording process with the “Start” button.

  1. Rufus will notify us that all files will be deleted from the flash drive. If you have already created a backup copy or there was no important information on the media, click “OK”.

As a result, it will begin Windows entry 7 onto a flash drive, after which you will have a full-fledged installation media at your disposal.

Attention! Before you begin the process of writing the system to a flash drive, be sure to save all the data on it - otherwise they will be irretrievably lost.

As we see, this method turned out to be much simpler than the previous one, but we will not dwell on this and will consider several more options for recording Windows 7 to a USB drive.

Making a bootable USB flash drive using WinSetupFromUSB

Another application focused solely on writing operating system files to an external drive. Let's take a look at the utility and look at the process of working with it.

  1. Select the path where the program will be unpacked (click on the button with the image of three dots) and click “Extract”.

  1. We are waiting for all the necessary files to be unzipped.

  1. We open the directory into which the unpacking was carried out and launch the program depending on the architecture on which your operating system is built. For us it is 64 bit, so we click on the marked file.

  1. We insert our flash drive into the USB port and make sure that it appears in WinSetupFromUSB. Next, check the box marked “2” in the screenshot. When the bird is placed, click on the icon with the image of three dots, marked with the number “3”.

  1. Select the image of our operating system and click on “Open”.

  1. All that remains is to press the “GO” key and Windows 7 recording will begin.

Windows 7 is being written to an external drive. Once the process is completed, the flash drive can be used to install the system.

We will not stop at WinSetupFromUSB and will tell you how to burn the OS to media via Windows 7 USB/DVD Download Tool from Microsoft.

Windows 7 USB/DVD Download Tool

This is an official application from Microsoft, so it should, in theory, do the best job of writing Windows 7 to a flash drive. Let's get started with the program.

  1. First, download the utility from the link from the official website. Then we launch it and click on the “Next” button.

  1. We are waiting for the program to install.

  1. We complete the installation process by clicking on the “Finish” button.

  1. Let's move on to working with the program. Initially, we need to specify the file that we will record. To do this, click the “Browse” button.

  1. After the path to the image file is registered, you can proceed to the next step - click “Next”.

  1. Here we should select the type of media on which we will install the “Seven”. Since this is a flash drive, we click on “USB device”.

  1. We make sure that our drive is displayed in the field marked with the number “1” and click on the “Begin copying” button.

  1. After this, we will be warned that all information from the media will be erased and, after confirmation, the process of transferring Windows 7 to a USB drive will begin.

Upon completion, we will receive a bootable USB flash drive, with which it is easy to install the OS on your computer.

The program requires the Microsoft .NET Framework 2.0 library. If you do not have it, then download the program from the official Microsoft website.

We use the UNetBootin program

The UNetBootin utility is completely free. you can download it without registering or sending SMS. The program does not need to be installed - it works immediately after downloading. An application was created not only for recording to a Windows flash drive, but also for other operating systems, such as Linux or Mac OS.

Let's move on to the instructions for using the application.

  1. First of all, check the “Disk Image” box and click on the button with the ellipsis. In the window that opens, we need a Windows distribution.

  1. In the drop-down list indicated by the number “1”, select a USB device, indicate our flash drive and click “OK”.

  1. The application will warn us that all data that is already on the flash drive will be irretrievably lost. If we don’t need them, click “Yes to All”.

The distribution package is being written to a USB device. Once it is completed, the flash drive can be used to install the OS.

Command line

You can create bootable media with “Seven” without using any programs using the system itself. For this we will use the command line.

The entire process is described in the form of detailed step-by-step instructions, each stage of which is accompanied by a screenshot for clarity.

  1. Initially, launch the command line. This must be done exclusively as an administrator. We will create bootable media using Windows 10 as an example, but you can get the same result on Windows 7 - 8. Press the Win + R button combination and press the “Browse” key in the window that appears.

  1. We follow the path indicated in the screenshot with the number “1” and find the cmd application. We right-click on it with our manipulator and select “Run as administrator.”

  1. We write to command line command diskpart and press Enter.

  1. To start recording to a disk, you must initially select it, and take this choice responsibly, because all data from it will be deleted. You can view a list of disks using the operators: “list disk”, “list volume” or “list partition”. The first two show a list of disks, the third displays the number of partitions and their names. Insert the flash drive into the USB port and enter the “list disk” command in DISKPART. Next press Enter. You will see a list of all drives installed on this moment in PC.

  1. Select the disk that we need. To do this, enter select disk disk_number. The disk number can be viewed in the previous step; for us it is “1” since its size is 14 GB, which corresponds to our flash drive.

  1. We remove the disk with the clean command. Make sure you do it again right choice– all data on the media will be completely deleted.

  1. Now we need to create the main partition for the flash drive, from which we will boot in the future. Enter the command create partition primary and press Enter.

  1. We set the drive letter using the assign letter=drive_letter operator. Let's do that. We know that our PC has drives C, D and E - therefore, we specify F. The final command will look like this: assign letter=F.

  1. You can also specify the partition size. If you skip this step, it will take everything free place. You can set the size of a logical disk using the create partition primary size=disk_size command. The size must be specified in megabytes.

  1. Select our disk using the select partition 1 command (indicate your disk number) and press Enter.

  1. Now we need to make our section active. To do this, use the active operator.

  1. All that remains is to format the flash drive - write a command like this: format fs=fat32 quick.

  1. Exit DISKPART using the exit command. Now you need to prepare the files for recording. We unpack our Windows 7 image using any archiver (we will use the usual WinRAR) and extract all the files to our flash drive.

The installation media is ready and you can use it.

We use the WinToFlash program

Let us describe the process of working with another program for recording Windows 7 and other operating systems on a USB drive. To get started, download the utility from the link from the official website.

  1. Install the program and run it. In the window that opens, select the item marked with a red frame.

  1. At the very top, select “Windows”, then indicate Windows 7 and press the button indicated in the screenshot with the number “3”.

  1. We indicate the path to the Windows 7 image that we downloaded. To do this, click the “Select” button.

  1. Click on “Add”.

  1. We make sure that the flash drive we need is indicated as the target, and click “Run”.

After this, the process of creating bootable media with Windows 7 will begin, after which the device will be ready for use.

Burn a bootable USB flash drive using WinToBootic

This application is one of the simplest tools for recording operating systems to external media. To work with the utility, you do not need to install it, nor do you need administrator rights. It will work like with Windows files, and with her images. The interface here is simple, and the speed of the program is pleasing.

To burn Windows 7 to a USB flash drive via WinToBootic, do the following:

  1. First, download the program from the link and launch it. Check the box next to “Quick Format” and click “Do It!”

  1. We answer the request for formatting in the affirmative.

  1. We are again notified that all data on the flash drive will be deleted. Don’t forget to save important information from the media, if it is there, and click “OK”.

  1. The preparation of the flash drive is completed, click “Thanks!”

  1. Next, select the files that will be written to our flash drive. To do this, click the icon indicated in the screenshot and select the image we need.

  1. Click the button to start the process again.

Windows 7 will begin recording to the USB flash drive. When it is finished, the device can be used to install the system.

How to boot from a flash drive

To successfully install Windows 7 from a flash drive, it is not enough for us to simply write the operating system onto the media; we also need to force the PC to boot not from the hard drive, but from a USB drive. This can be done in two ways: either by modifying the BIOS, or through a special boot menu.

Regarding the Boot Menu, we can say that it is launched using different keys, depending on the model of the computer or laptop. You can see which button is responsible for this on your device in the instructions for it. We provide a list of combinations for the main brands of computers and laptops:

Launching Boot Menu on PC:

Launching Boot Menu on a laptop:

Below is a list of keys that launch the BIOS on different computers and laptops:

For clarity, we will show the process of installing a flash drive as the first boot device using the example of our PC with motherboard Asus:

  1. We turn off or restart the computer and after it starts, press the button to go to the BIOS (for us it’s Del).

  1. This is what the BIOS itself looks like.

  1. Go to the Boot tab.

  1. We install our USB drive as the first device.

The process is similar on different computers, although the names of the tabs and items may differ. In order to understand how to enter the BIOS of your PC, read the instructions for it.

Installing Windows 7 from a USB flash drive

After the BIOS has been configured, you can proceed directly to installing Windows 7 from a flash drive. Let's get started.

  1. Immediately after the system starts, you will see the following window (data for installing Windows 7 is being preloaded).

  1. Set regional parameters. Select your system language, region of residence, and keyboard layout. If desired, all this data can be specified after Windows starts. When the setup is complete, click on “Next”.

  1. At the next stage, simply click “Install”.

  1. All you have to do is accept the license agreement and the installation will begin. Check the box as shown in the screenshot and click “Next”.

  1. We select the full installation mode - this is the so-called clean option, when all old data on the system partition is deleted.

  1. We are in the section settings menu. Click on the entry outlined in red.

  1. If your disk is not partitioned, you can do this here (for Windows 7, it would be best to use about 100 GB of free space, the rest will become drive D). Don't forget to format your system partition before installing Windows on it. When the operation is completed, click on the “Next” button.

  1. Finally the Windows installation began. We are waiting for the process to be completed.

  1. Next, the system will reboot and we will be greeted with the Windows startup screen

  1. Initial optimization is underway. The system prepares all the necessary files.

  1. System services begin to start.

  1. After which we proceed to complete the Windows installation

  1. We are again informed that we need to restart the computer.

  1. The system will check how productive our video card is.

  1. Now we need to provide our details. We write arbitrary name and the name of the computer. Then click “Next”.

  1. If necessary, you can set a password that the system will request upon startup. We skip this step since the computer will be at home.

  1. If you have Windows key 7, you can enter it here, however, you can do this even after the system starts. We skip this step.

  1. We choose the system protection option depending on our personal preferences. We will be installing another antivirus, so the regular one will not be needed.

  1. Enter the time and time zone. Then click “Next”.

  1. We decide on the type of network. This is quite an important step, because if we specify home network, but we are connected to the public, our security will suffer greatly.

  1. The settings are applied and the network is automatically configured.

  1. Last minute of optimization before our Windows 7 launches.

As a result, we installed Windows 7 from a flash drive, the creation of which was described above.

Instead of an afterword

We looked at a lot of different programs and Windows tools in order to answer the question: how to install Windows 7 from a flash drive. However, these are not all options. There are a lot of such programs on the Internet. They differ in their convenience and functionality. Some utilities are better suited for ordinary users, while others are better suited for professionals.

Which method to choose and how to write Windows 7 to a flash drive should be determined based on purely personal preferences. Use the option that you like, and if you have any questions, ask us in the comments. We are committed to the shortest possible time give a comprehensive answer.

Windows 7 remains the most popular operating system in the world to this day. Many users, not accepting the new flat design of Windows, which appeared in the eighth version, remain faithful to the old, but still relevant operating system. And if you decide to install Windows 7 on your computer yourself, the first thing you need is bootable media. That is why today the question will be devoted to how to create a bootable USB flash drive with Windows 7.

To create a bootable USB drive with Windows 7, we will turn to the help of the most popular program for these purposes - UltraISO. This tool boasts rich functionality, allowing you to create and mount images, burn files to disk, copy images from disks, create bootable media and much more. Creating a bootable Windows 7 USB flash drive using UltraISO will be very simple.

How to create a bootable USB flash drive with Windows 7 in UltraISO?

Please note that this method is suitable for creating a bootable USB flash drive not only with Windows 7, but also for other versions of this operating system. Those. you can burn any Windows to a USB flash drive using the UltraISO program

1. First of all, if you do not have the UltraISO program, you will need to install it on your computer.

2. Run the UltraISO program and connect the flash drive on which the operating system distribution will be written to the computer.

3. Click the button in the upper left corner "File" and select "Open" . In the explorer that appears, specify the path to the image with the distribution of your operating system.

4. Go to the menu in the program “Boot” – “Burn hard disk image” .

Please pay Special attention, that after this you will need to provide access to administrator rights. If your Account does not have access to administrator rights, then further actions will not be available to you.

5. Before starting the recording process, the removable media must be formatted, cleared of all previous information. To do this you need to click on the button "Format" .

6. When formatting is complete, you can begin the process of burning the image to a USB drive. To do this, click on the button "Record" .

7. The process of forming a bootable USB drive will begin, which will last for several minutes. Once the recording process is completed, a message will appear on the screen "Recording complete" .

As you can see, the process of creating a bootable USB flash drive in UltraISO is incredibly simple. From this point on, you can proceed directly to the installation of the operating system itself.