Often, after returning from the store, customers find anti-theft clips on their clothes that the sellers have not removed. It is quite problematic to remove a magnet from clothing on your own, and therefore, if you still have the receipt, it is better to return to the store, where they will quickly open it using a special device.
But if the item was purchased in another city, the receipt was lost, or you simply don’t have time to go to this store, then you will have to act on your own. You should immediately take into account that the magnetic tag contains indelible paint inside, which will ruin the renewal if any careless action is taken.
What is a magnetic tag
This is a magnetic-acoustic anti-theft sensor in the form of a plastic clip.
It is equipped with:
- metal rod for clothes;
- balls and two different cones;
- protective spring for fixation;
- capsule with indelible paint.
When you try to open it, it closes even more or fails altogether. However, many ways have been found to remove the magnet safely.
The most common proven methods
You need to act extremely carefully, then it is possible to successfully remove the clips at home without special pullers.
Methods without and with a magnet:
- Scrunchy. The accessory is placed between the fabric and the convex part of the magnet, which rotates, and is pushed until the elastic hooks tightly and the rod is free - then you can begin to move both parts into different sides until fully opened.
- Lighter or candle. With the help of fire, the convex part is melted, after which the internal contents of the clip are removed and opened.
- Wire cutters. The convex part of the magnet is cut off with a tool, then the protective mechanism is removed and the remains of the clip are removed.
- Hacksaw for metal. A saw works on the same principle as wire cutters: they separate the head and disassemble the mechanism. For safety, keep the latch with the convex side up.
- Round or square magnet. It is purchased in a specialized store. A magnet is applied to the rounded part and the clip opens easily. If you were unable to demagnetize the tag on your clothing the first time, you need to turn the magnet over to the other pole or take a more powerful one.
- Screwdriver with drill. Drill out the middle until the needle comes away from the plastic. Then carefully disassemble.
Advice! A suitable magnet can be removed from a used hard drive (you will need up to 4 of them).
Almost everyone has come across small magnetic clasps that are attached not only to clothes in boutiques and stores in shopping centers, but also for bottles of alcohol and other expensive goods in supermarkets. Locks of this type are placed on clothing using a thin metal pin that passes through the clothing and is secured on both sides with plates. They are attached to the bottles using a coiled wire attached to the main part of the lock. If you try to take goods equipped with such locks out of the store, the alarm installed in the frames at the exit from the store will go off. These “magnets” prevent theft. The most surprising thing is that there is essentially no magnet in the lock, but that’s not what we’re talking about.
Cases where sellers forget to remove the lock and the buyer does not notice this are quite common. It’s just strange how you manage to pass through the frame without it squeaking, but this can always be attributed to something.
Often you don’t want to return to a store located at the other end of the city, and therefore a legitimate question arises. This is what we will talk about in this article. Let us warn you right away - do not use the acquired knowledge for personal gain, trying, using the methods given below, to remove the lock in the fitting room and take the item away in a bag. The article is intended for honest people who really find themselves in an unpleasant situation, and we decline responsibility for the actions of attackers.
Go to the store for help
So, let's start telling you how to remove magnetic locks from clothes. The easiest way is to return to the store, no matter how far it is from your home. Just don't forget to bring your purchase receipt with you. Otherwise, trouble is possible - the likelihood that the sellers remember your face is not so high, and therefore accusations of theft may fall, and it will come to calling the police. It is not a fact that every store has cameras that could record your honest purchase. And by the time your relatives bring the check, a lot of time and unpleasant minutes will pass. By the way, this is another reason to pick up checks and keep them for a certain time.
If the store is too far from your home and you don’t want to return to it, then there is another option, how to remove magnetic locks from clothes. It will also require the involvement of third parties. Go with the purchased product to the store closest to your home and ask the sales consultants to solve the problem. Fortunately, systems that remove the lock from a magnetic lock are now installed in almost all stores, especially large ones. Again, don't forget to take your receipt with you. This will protect you from unfounded suspicions and unnecessary troubles.
Variety of other options
In the case when both of the above methods of how to remove magnetic locks from clothes are irrelevant for you, you need to turn to the third. You will have to get a little angry at the magnet, imagine that you hate it even more than your own boss, grab one edge of your clothing so that the lock is on the other side, and hit the wall or floor with all your might. The essence this method is that when strong impact you will be able to activate the internal structure of the lock - in particular, a special cylinder with balls, which will press on the spring and separate both parts of the “magnet”. It’s not a fact that it will work out the first time, but with the right amount of effort, the result will come pretty soon.
The main disadvantage of the previous method is that when hitting and waving clothes, you can damage the clothes themselves. Therefore, we will tell you about another method, how to remove magnetic locks from clothes. He is an improvement last option. Place the clothing on a hard surface, preferably one that will not break when struck with a hammer. The main thing is to turn the “magnet” out so that as little clothing as possible remains under it. Once you have completed all the preparations, strike the magnet with the wide side of the hammer. This will allow you to break the lock. If you want to keep it safe and sound, take the “magnet” in one hand, and the hammer in the other, and deliver blows that will be much softer, but more targeted and no less effective. Three, maximum five blows will be enough to release the lock, that is, to force the cylinder to press on the springs.
And this method does not suit you? Then another option is how to remove magnetic locks from clothes. There is a small bulge on one side of the locking device. Take any sharp, reliable and strong object (for example, a carving knife) and start picking at the bulge. Be careful not to get hurt; in this case, holding the lock in your hands is not recommended. As soon as the spring comes out through the hole you made, the cylinder with balls will also be unlocked and this will allow you to remove the lock.
Boomerang effect or use a magnet against the “magnet”
The next way is how to remove magnetic locks from clothes, will be virtually identical to what is used in stores. Again, find the face of the lock and the bulge on it that we tried to pick out earlier, and apply a powerful magnet to it. The cylinder will be pulled towards the magnet and press on the spring, which will allow you to get rid of the lock. But the magnet used for these purposes must really be powerful enough, since the cylinder is relatively heavy and it is not so easy to set it in motion. Especially if you decide to use the first magnet you come across, which is a souvenir item attached to the refrigerator. But a DC electromagnet will certainly help you.
By the way, an AC electromagnet used in a compressor that supplies oxygen to the aquarium can come to the rescue. However, first you will have to “break” it a little - remove the end plate, exposing the W-shaped core. Now again determine which side of the lock the bulge is on and bring it to the core. The magnet causes the lock to vibrate, pulling and releasing the cylinder and spring. All you have to do is guess the moment when the cylinder begins to put pressure on the spring and remove the plate blocking the lock.
We hope that from a variety of ways, how to remove magnetic locks from clothes, you will still find the one most suitable for you. Good luck fighting the castle and be careful when purchasing goods. This will save you from having to cheat in order to remove the lock.
How to remove a beeper magnet from clothing?
- Using a lighter to melt is the best option.
- I cut it with pliers from the side of the bun, not the convex side
- Often, upon returning from the store, customers find magnetic clips on the purchased items. Careless sellers simply forget to remove the magnet from clothing. And, in violation of all the rules, for some reason the thing does not beep at the output. What should you do in this case?
The first tip is that the buyer should return to the very store where the item was purchased, present the receipt and the item to the seller. It is best to have the clip removed by a specialist who has the necessary equipment for this.
However, there are cases when returning to the same store is not possible: for example, the purchase was made in another city or the receipt was lost. The question arises: how to remove a magnet from clothes at home in this case?
This question is not at all idle. After all, among other things, coloring liquid is often poured into the clip. Therefore, sometimes such an unpleasant incident happens that the buyer, having discovered a magnet at home on the purchase, begins, according to the old Russian habit, to correct this oversight with the help of a chisel and sledgehammer. The plastic clip breaks and the paint ruins the new one, sometimes expensive thing. It's a shame!
Although some share their tips on how to remove a magnet from clothing without ruining it. For example, it is suggested to cut off the head of the clip with a hacksaw. To protect against staining, keep the clip with the hole facing up. After making two oblique cuts, you need to remove the cap and pick out the mechanism.
There is another option for how to remove a magnet from clothes, which is also suggested by Internet users. They suggest hitting the clip harder on the floor with the convex plastic side. After the impact, the magnet flies off by itself.
However, this option is extremely dangerous precisely for those cases where the clip is filled with paint: after removing the mechanism in this way, the item will most likely be damaged. Therefore, the one who shared his experience should understand: he was just lucky!
Some people use side cutters to free clothes. Someone heats the belly button with a lighter flame until a hole is formed through which the insides of the chip are pulled out. And someone simply bent the edges of the clip with pliers, pulled out the white ring that ran along the contour, and as a result, the spring and stud easily separated.
All tips on how to remove a magnet from clothing using mechanical actions, although they can lead to a positive result, however, have a certain risk of damage to the product. Therefore, experts consider the option using a strong magnet to be optimal and safe.
For this procedure, you need to acquire, in fact, a strong magnet. It can be taken from a used hard drive from a computer. You will need about 4 of them. They sell used hard drives on radio markets for 50,200 rubles. Of course, buying 4 disks for 200 rubles to demagnetize a beeper from an item priced at 1000 rubles is a dubious pleasure. It’s another matter if the purchase had a cost much higher than the cost of 4 discs.
So, after all, how to remove a magnet from clothes if the buyer chooses to use magnets from hard drives for this? First you need to remove the magnet from the disk. This is easy to do by driving a thin knife blade between the plate and the magnet and squeezing the magnet firmly.
However, it should be taken into account that the magnet must be applied to the very top of the beeper, to its extreme protruding point. The magnet demagnetizes the clip, and the mechanism opens itself.
You don’t have to bother with purchasing old hard drives, but immediately go to a hardware or radio store and buy a strong magnet there. Although there are several ways to make it at home. It is enough to take a small magnet and a piece of iron, and by passing the iron over the magnet several times, you can “magnetize” it. Of course, over time, due to impact or strong heating, iron will lose its magnetic properties. But we don’t need it for very long.
There is another way to make a magnet at home. True, this requires an inductor coil large sizes, and there is a risk of short circuit.
- Can be removed in 10 seconds, the main thing is to understand the design https://youtu.be/K1iGMw_lGo0
- Pliers. Verified.
- Here is a magnet like in the store, for removing clips or as they also call ALARMOV for 1300 rubles, a little expensive but http://magnit-42.ru/
- I removed 3 magnets in a minute using wire cutters. The saleswoman did not demagnetize all three purchases
- ...good luck, well, I took it off, it probably helped...
Maybe it didn't help. Now he’s sitting in the corner, scraping paint off his forehead)))) - I removed it with a neodymium magnet hard drive
- good luck, well, I took it off, it probably helped
- and did it help?
- YOU'RE TALKING ABOUT SHIT, HUH?!
Surely, many of you are familiar with the situation when, upon returning from a shopping trip, you discover a magnet on your newly purchased item, protecting sellers from thieves.
These same sellers often forget to remove the magnets when selling, sending the buyer home with such a souvenir. Otherwise, these magnets are called “clips” or “beepers”.
The first piece of advice is don’t try to act by force. In principle, with some effort, the magnet can be removed using pliers or a hammer. But there is one thing! The developers of these magnets, in order to protect themselves as much as possible from theft, often fill them with ink. As a result, you will get rid of the magnet, but it will be impossible to completely wash your new item of caustic ink.
We offer you a safer and more effective method.
1. To remove the magnet, you need an even stronger magnet. In everyday life, the strongest magnets are used in hard drives. Used discs can be purchased at radio markets for 50-100 rubles.
2. The magnet itself is glued and magnetized to its site. Removing it is not difficult - you need to drive a thin blade between the magnet and the plate and apply a little force.
3. However, the magnet from one hard drive is not enough - it is weak, you will need 4-5 of them.
4. So, take the thing with the forgotten beeper
5. This method of applying a magnet immediately suggests itself.
6. But as you can easily see, nothing will work out.
7. The magnet should be applied to the end of the convexity on the beeper
8. Then carefully remove the magnet along with the beeper
9. That's it, the item is ready to wear.
And you don’t have to run back to the forgetful seller, and it’s good if you have a receipt. And without a receipt, you will simply be mistaken for a thief.
For those who find the process of removing magnets from hard drives too difficult, you can immediately try to purchase a strong magnet. Sometimes they are found in hardware stores or radio stores.
This article is intended exclusively for those who want to get rid of magnets on PURCHASED them things.
Today I took out the jeans I bought a couple of months ago from the rack. I put it on and felt something was bothering me. Then I saw the reason for the inconvenience:
The store where I bought it forgot to remove the black round magnet that prevents things from being stolen. I don’t know if it should beep, but nevertheless, the seller forgot to remove it. It's been a while since I bought them. It’s somehow awkward to go to a store without a receipt; they’ll think they’ve stolen something, and anyway they have thefts. How to dodge it later. I decided to take it off myself. Of course, it didn’t work out by hand. I started googling. It turned out that breaking such protective element undesirable - there is a special powder inside. which greatly stains the thing, hands and everything it comes into contact with. It is advised to freeze the item in the freezer so that this composition freezes and only then try to break something.
There is a method with inserting an elastic band. I tried it and it didn't work.
It is also advised to set fire and melt central part, from where the spring can be removed.
If I had a magnet, the problem might be solved, but I still don’t.
This is what a store magnet looks like after disassembly
You can, of course, go to the nearest store and ask them to take it off. I wrote to several VK friends to see if they knew anyone who worked in clothing stores. There are no affirmative answers.
I'll think, in short...
As advised, I froze it in the freezer. I tried to bend the edge - the plastic flew off. There was no turning back now.
I took a lighter and began to melt this edge with the visible metal part.
Periodically I picked at it with scissors and all sorts of screwdrivers.
I broke the first half, only the metal cap remained. You can bite it off with wire cutters, pliers, or cut it with a hacksaw. It won't work with scissors.
Result:
