In this article, you will understand how to find out the WiFi password. Losing access to a wireless network is one of the common problems of the average user. We will tell you how to find out the WiFi password on a laptop, computer and mobile device.

Where to find the Wi-Fi password on a computer or laptop

The access code can be very easily found out through a computer if your device is connected to an active Wi-Fi network. To do this, you need to look at the access code in the Network Control Center. It is possible that your device is not connected to a valid network, then you will not be able to view the password on your computer. We will discuss below how to return the password on the router in such cases.

Windows 7, 8, 10

In these operating systems, finding out the security code is not very difficult. In the “seven”, “eight” and “ten” everything is very similar, and the instructions there will be the same. There are a couple of separate nuances, which we will discuss below.

Some versions of the OS do not display the “Manage wireless networks” item in the settings. For such systems, when opening a window from the tray (as written above), we do not go to the “Sharing Control Center”, but right-click the grid itself in the line of active connections and go to its properties. Next, we proceed in the same way as described before.

Windows XP

Find out the WiFi password on a computer with installed Windows XP will be a little more complex than its “younger” versions. To do this, you will need to re-establish the connection manually using the “Wireless Network Wizard”.

Looking for a password in the router settings

How to find out the password for the network we are interested in if there is no way to connect to it. The access key is also located on the router that serves your network. The router always comes with a “patch cord” (this is a small piece of twisted pair cable, crimped on both sides with “RJ-45” connectors). We must physically connect the device that distributes the Internet to the computer/laptop.

Login to the web interface

In order to find out/change the access code in the router settings, you need to go to the “web interface” (this is a graphical shell operating system router). You will learn where to find the entrance from the following instructions.

Password location for different router models

Manufacturers of devices for creating wireless networks for the most part try to give individual look interface of your devices. Therefore, it is not so easy to find out the password for your WiFi if the router you are so used to has changed. An unfamiliar interface confuses the user, and the fear of “clicking the wrong thing” does not allow one to calmly understand the new settings. In the continuation of the article, we will look at how to find the access code to your network using examples from world leaders in the production of equipment of this type.

D-Link

In routers from this manufacturer, you can find the password by clicking on the “Security Settings” link, which can be found in the Wi-Fi tab of the main menu of the router interface. The password will be in the line “PSK Encryption Key”. At this point you can change it; to do this, enter a new eight-digit security code in the field (the encryption system does not support security keys of less than 8 characters) and click “Apply”.

Asus

To find out the password for this company’s router, find “Advanced settings” in the main menu of the device. Select the wireless network tab, and in the menu on the right you will find the line “WPA Pre-Shared Key”. This is the security key for your Wi-Fi network.

TP-Link

You can view your password on the TP-Link router in the “Wireless Security” menu, which can be accessed from the main menu. Next, everything depends on the choice of encryption, in the case of WEP protection we find the security code in the “Key 1” line, in Enterprise mode this is the security code from the “Radius server”, and in personal mode “PSK Password”.

Tenda

To find out the WiFi password on the trend, find on home page web interface, select “Security code for wireless network”.

ZyXEL

You can see the key to the wireless network if you click on the icon in the form of a telephone network icon at the bottom of the interface, go to the “Access Points” section and look at the “Network Key” field.

Linksys

The Wi-Fi password is located behind the stylized image of the wireless network in the tab of the same name. We look at the line “Password” - this is your Wi-Fi access code.

Reset all router settings and enter a new password

If you have forgotten your password, it is possible to completely reset all the settings of the router to those that left the factory (this is a common practice in case of any “glitches” related to the hardware software). This, of course, will not help you remember the password, but it will be reset to the standard one (there are cases when the factory settings imply no password-protected access to the World Wide Web). You can find out what your standard access code is on the back cover of the device or in the instructions for it. After the reset you can easily install new code access (basically, you can change the password in the place where you found it in the separate instructions for the devices).

Many people have found themselves in a situation where they need Wi-Fi and their smartphone or laptop catches many networks with a good signal, but each network has a password. Of course, we can say that connecting to someone else’s network against the will of the owner is ugly. But what if connecting to the Internet is a matter of life and death? For such cases, there are several working options for bypassing the protection:

  • brute force;
  • changing mac address;
  • hacking programs;
  • android applications;
  • traffic interception.

Brute force is a banal selection of all possible combinations of characters that a password can consist of. This is perhaps the simplest method that you can think of, since it does not require special knowledge or complex software. But, on the other hand, the complexity of the method lies in the fact that it is quite tedious and the process can take a very long time if the owner has set a fairly complex password.


Automatic selection of combinations

It is not necessary to carry out this operation manually. There are quite a lot of programs that automatically select combinations sequentially. It's much faster and easier for the user. But it’s worth keeping in mind that finding the right combination can take quite a while. for a long time, even if you use special software. A simple password like qwertyui can be cracked in less than a minute, but decrypting /#7&//.’ will take a very long time.

WiFi Crack

One of the programs for automatically selecting passwords is WiFi Crack. It is very easy to use.

  1. Download the program from any site that distributes similar software.
  2. We launch the file and see a simple interface in front of us.

  3. At the top in the “Refresh” line, select the network that needs to be hacked and activate the program by clicking the “Scan for Access points” button.

  4. We wait for the network scanning process to complete, click on the active button, in our case “Wi-Fi WPA”, with a list of found networks.

  5. In the “Select Target Access Point” section, click on the desired network.

  6. At the bottom of the window, click on the “Browse” button to select a file with a dictionary of possible passwords.

    The note! Most likely, the program will require you to connect a dictionary, which it will use to select passwords. Typically, dictionaries are included with the program.

  7. Having configured the parameters, press the “Wi-Fi Attack” button and wait for the process to complete.

  8. The end result of the program will be an inscription with a password under the line “Finished” at the very bottom of the window.

  9. We return to the program interface and click on the “Key Database” button.

  10. IN open window you will see connection information, including the Wi-Fi password.

The note! On average, the program takes 30-90 minutes to crack a password. Since users rarely set truly complex passwords, most can be cracked in half an hour. But there are also passwords that can take years to crack. So not every network can be hacked.

Changing Mac address

Passwords are not always used as protection for Wi-Fi. Quite often, users use a filter based on mac addresses. From the device, this network will be detected as open and does not require a password. But connecting to it will not work, since our mac address does not pass filtering. So, the only way out is to change the mac address of the device to a suitable one. But how to do that?

If you have completed these three steps, connecting to your network without a password becomes impossible. More precisely, you can connect, but it will take so much time and energy that any hacker will very quickly understand that the game is not worth the candle.

There are many ways to hack someone else's Wi-Fi. But all of them are aimed at users who have not taken care of connection security.

Video - How to hack your neighbor's Wi-Fi password in 5 minutes

The main ways to recover a router password are hardware and software. In the first case, it is possible to check the settings on the device’s home page, while the software method requires the registry and special applications that can be used to scan information on the computer. Below we tell you what to do if you forgot your router password. We'll bring everything possible methods, as well as instructions for restoring access to the router. Here are proven ways to find out the wifi password, which we suggest reading below.

Recovering the router password

Before you find out what a user should do if he has forgotten the router password, he will need to follow several simple sequential steps to recover data.

Data recovery using a computer

1. There is a Wi-Fi icon at the bottom right corner of the screen. Right-click on it;

3. Then another window will appear on the screen, on which you will need to right-click. Select "Properties";

4. Now you need a “Network Security Key” located inside the “Security” tab, where you will be presented with a hidden password. Check the box “Display entered characters” and the password will become available.

There is another way to solve the problem if you forgot your password Wi-Fi router. To implement this you will need a router.

We use a router

1. Connect the equipment to your computer using the power cord (supplied);

2. Enter the set of numbers 192.168.1.1 in the address bar of the browser, then enter the data in the login and password column. This will give you access to your hardware settings. By default, the password and login are set to admin on most equipment models;

Password reset

Resetting the settings to factory settings in most cases solves the problem with the password, but is considered the most radical. Below we will tell you how to reset the password from a Wi-Fi router correctly. If the factory settings are not suitable, it is recommended to reset the settings. It is worth noting that this is not difficult to do:

1. All routers are equipped with a small button located next to the power button. Press the button for 10 seconds;

3. Go to the equipment settings, where you can enter your personal data again in order to use the device again.

Regardless of which routers (Asus, Tp-Link, etc.) you use, the principle of resetting settings is the same for different models. Changing your Wi-Fi password is easy: just follow a clear sequence of steps.

Password recovery using the program

There are various effective programs that help you recover your router password. A software method for resetting a router password or recovering forgotten data helps solve the problem using the following programs:

The above is not all the programs used to view the password on the router. Such products are developed by amateurs and often contain links to resources with virus software.

Important! Since the use of amateur programs poses a threat to computer security, it is advisable to use an anti-virus program throughout the entire process of restoring identification data!

The RouterPassView program is very popular in solving such problems, the operating principle of which is as follows: all passwords and logins are saved in a saved equipment configuration file. But getting to this data is not easy because it is encrypted. It is this file that serves the user's interests. To use the program, take several steps:

1. Launch the program;

2. Click the "Open File" icon;

3. Specify the path to the file or drag the file into the program window using the mouse.

The program is released on English language, and therefore you will need a cracker.

Error 651 miniport wan

Recovering a password on a router may be accompanied by an error message. It is worth saying right away that this failure is insignificant and the way to eliminate it is most often simple. This message indicates a problem with the modem or router. The reason may be incorrect interaction between the computer and auxiliary equipment. Lack of physical connections via miniport wan on Windows OS, technical work on the part of the service provider, incorrect network connection settings - all this can cause an error message to appear. However, in the vast majority of cases, the root of the problem lies in incorrect user actions. The way to fix the error is as follows:

1. First of all, you should restart your computer;

2. The next step is to disconnect the router from the network for 10 minutes. Turn it on again after the specified time has elapsed;

3. Now you will need to check network cable for integrity. Also check if it is properly connected to the network card;

4. If you have several network cards, try connecting to each of them one by one;

5. Internet connection has great importance, so check the connection signal when using a device other than your computer;

6. Next, you will need the “Control Panel”. Go to the section and remove drivers for network card, then install latest version provision.

Often the instructions given above help solve the problem of eliminating the error. In rare cases, users have to go to customer service specialists.

Standard passwords for routers

The standard router password can be useful in solving the problem under consideration. Most often, in the standard equipment settings, the default login is admin, as well as the corresponding password. However, it is worth understanding that not all manufacturers adhere to standard names, and therefore there may be some differences. D-Link DI-804 is a router model that has an unexpected feature - the password entry field must remain empty with a similar login, while the Zyxel Prestige 650 model provides a password and login in the form of a set of numbers 1234.

Features of individual routers

In the event that the user has lost access keys to the administrator page, as well as the equipment itself and the local network, the Internet, the restoration of each of them will involve a special sequence. For hardware recovery on the tp link router, you will need some data - a password and login to the administrative page, where the parameters and settings of the local network and Internet connection are located. In the address bar, enter the IP address of the equipment manufacturer (indicated on a sticker at the bottom of the router). If such a sticker is missing, use the following information:

  • Zyxel – 192.168.1.1;
  • TPlink – 192.168.1.1;
  • D-link – 192.168.0.1;
  • Netgear – 192.168.1.1;
  • Asus – 192.168.1.1.

For asus router Account will differ from what is required for the D-link router. After logging in using the appropriate hardware credentials, the user will be able to access an interface with various settings and network parameters. Enter the tab " The local network» to find out the data. Find the “wpa key” parameter, opposite which is the user password for accessing the Internet. Regardless of whether the equipment requires an Asus account or requires incoming data from a Beeline router, the recovery sequence is approximately the same.

Report content


  • Copyright infringement Spam Incorrect content Broken links

  • This method is suitable for your personal router or any other one to which you have physical access. Most modern routers have a unique default network name and password. They are usually printed on a label with serial number and other service information or on a special sticker.

    All you have to do is get to the router and carefully examine its back side. If there is nothing there, try looking at the instructions or Googling the router model. You'll probably find what you're looking for.

    2. Find out the password from Windows network settings

    If you are (or have ever been) connected to the network through Windows, then it will kindly tell you forgotten password. Depending on the Windows versions The names of the menu items may differ, but the meaning is approximately the same.

    You need to go to the “Network and Sharing Center” and get to the list of wireless networks. Then open the properties of the desired network and look at the password in the “Network security key” field, not forgetting to check the “Display entered characters” checkbox.

    With Mac it's exactly the same. OS X stores the password for every network you've ever connected to, and of course you can see it.

    This is done in the “Keychain”, where all your passwords are stored. We launch it through Spotlight or from the “Programs” folder and select the “System” section in the sidebar on the left. Next, find the desired network in the list and click on the “i” button in the panel below. We check the box next to “Show password” and after entering the administrator password we see our Wi-Fi password.

    4. Find the password in the router’s web interface

    If you have access to the web interface, you can view the router password there. To do this, go to the address 192.168.0.1 (or 192.168.1.1) in your browser and enter your username and password. The menu structure for each manufacturer is different, but the point is to find the Wireless Network section, which has a Security item with protection options. It contains our key, that is, the wireless network password.

    The menu we need looks something like this. The password is hidden by default, and to display it you need to click on the Display password button or something like that.

    5. Reset your password and set a new one

    Nothing can stand against brute force. If the password cannot be obtained, then you need to hack it, that is, reset it. This method is only suitable if you need the password for your home router, but it will work on absolutely any router, since each of them has a physical reset button. The only negative is that if your provider uses specific connection settings, you will have to configure it again.


    simpson33/depositphotos.com

    So, we take the router out of the closet, from the mezzanine - or wherever it is hidden there - and carefully look at the part of it where the ports and control buttons are located. Look for a small hole with Reset written next to it. This is the reset button. You need to press it with a paperclip or a needle and hold it for a few seconds (if that doesn’t help, then press reset and, without releasing the button, turn off the router for 30 seconds, and then, continuing to hold the button, turn it on and release it after 30 seconds). After this, the router settings will be reset to standard and you can find out the password using one of the methods described above.

    If the user has forgotten his WiFi password, he will have several options to choose from to recover the access code. You can find out the password in the connection properties using built-in Windows tools or special software, and also look in the router interface and configuration files mobile phone, if you connected to a wireless network from it.

    Viewing using Windows

    If at least one PC or laptop is connected to Wi-Fi networks, then finding out the key from her will not be difficult. What to do:

    After completing the described steps, the password that you wanted to restore in memory will appear in the “Security Key” field. Some users ask what to do if there is no management option in the Network Sharing Center. If you encounter a similar problem, then you can find out the Wi-Fi password in a slightly different way:

    1. Open the list of available wireless points in the notification area.
    2. Find the network to which the computer is connected (there will be a “Connected” status next to it).
    3. Right-click on the point and go to properties.

    The same window will appear as when performing the steps above. Then the instructions are repeated: go to the security settings and turn on the display of entered characters to view the saved key for establishing a connection to the network.

    In addition, instead of standard Windows tools, you can use third-party utilities such as WirelessKeyView. This software is distributed free of charge, so when downloading you need to be careful not to pick up viruses or adware. Therefore, it is preferable to use system tools or look at the security key in the router interface.

    Search in the router interface

    Viewing the key in Windows is a cool method, but what to do if there is no computer connected to Wi-Fi? How to recover your password? Here the router interface will come to the rescue, in which the network password is indicated. To open the router interface, you need to find out its address. If you don't remember it, look at the bottom of the case or use the built-in Windows tools. What do we have to do:


    Default gateway = router address. Write it in the address bar of any browser, then press Enter. An authorization window will appear where you must specify your login and password. You can view them in the documentation or on the router case. By default, most models have the admin/admin pair installed. If you haven't changed anything, then this login/password pair will do.

    What to do if you forgot your router password? The easiest way is to reset it to factory state. True, after the reset you need to reconfigure the connection, but you will be taken to the interface using standard authorization data and can set a different password on Wi-Fi. Since you have already entered the router interface, you need to know what to do next. The procedure is quite simple:


    You don't need to do anything else, just close the device's web interface. Depending on the router model and firmware version, the names of sections and items may change, but this will not prevent you from finding out the Wi-Fi password and restoring access to the network on other devices.

    Using your phone

    If you connected to Wi-Fi on a phone running Android OS, you can find out the network password in the configuration files mobile device. To view the password and other information about the wireless connection, you need to install the Root Browser application on your phone and allow it access to system files.

    The file contains information about all Wi-Fi points to which the phone has ever connected. Information about each network begins with the word "network" and ends with a priority and a closing curly brace. To find out the password, find the desired access point and look at the “psk” line.